The side lengths of a quadrilateral do not uniquely identify the shape, because a quadrilateral is not a rigid shape. It can be flexed so that its area can be varied without changing the side lengths.
As an example, consider a rectangle. It can be flexed into a parallelogram which can be made so thin that its area can be made smaller than any given value. Whereas a general quadrilateral may have a residual triangle that cannot be removed, there is a huge range of values for the area.
More important, what is the question? Four different lengths do not define a rectangle.
348 sq ft
29ft 9 inches = 9.07 metres.
13 feet, 2 inches 42 feet 11 inches - 29 feet 09 inches = 13 feet 02 inches
More important, what is the question? Four different lengths do not define a rectangle.
29 square feet is 3.2 square yards.
377 square feet is 35.02 square meters.
348 sq ft
Hmm - well, for one thing, it would wouldn't be referred to as area, as area represents a two dimensional measurement. What you're naming is a four dimensional measurement, so we would probably refer to it as hypervolume. The principal behind measuring hypervolume would be the same as that of measuring the area of a rectangle or the volume of a box. Simply multiply it's side lengths together: 29ft * 17ft * 15ft * 9ft = 66555ft4
29ft 9 inches = 9.07 metres.
Perimeter = (1 + 29 + 1 + 29) = 60 ft Area = (1 x 29) = 29 square feet
348 inches in 29ft
29ft lbs
The average man can jump 8 feet.But the world record for a long jump is 8.95m (29ft and 4inches)! Which was done by Mike Powell.
The circumference can be found using the equation (Pi)(D) = C. 3.14*29 = C 91.06 = C The circumference is 91.06ft.
First af all, I hope you are using new head bolts. Torque procedure is several steps: a) all bolts 15ft pds, b) all bolts 29ft pds, c) all 37ft pds. Now, one at a time back off each bolt two revolutions and torque to the following spec in sequence: LONG BOLTS 11-19 ft pds, and rotate an additional 85-95 degrees. SHORT BOLTS 7-15 ft pds and rotate an additional 85-95 degrees.