0
What is the standard IRQ setting for a math coprocessor?
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the standard IRQ setting for the system time?
IRQ 1
What is the standard IRQ setting for primary IDE controller?
14
What is the common IRQ setting for COM3?
4
What is IRQ 5?
This interrupt is the first choice that most sound cards make when looking for an IRQ setting.
What is the IRQ for a keyboard?
IRQ 1 is used exclusively for the keyboard controller.
Which setting must a device have in order to interrupt the CPU?
IRQ
List interrupts used with the IBM PC type sytems?
IRQ 0 - System timer. IRQ 1 - Keyboard. IRQ 2 - Cascaded signals from IRQs 8-15. IRQ 3 - COM2 (Default) and COM4 (User) serial ports IRQ 4 - COM1 (Default) and COM3 (User) serial ports IRQ 5 - LPT2 Parallel Port 2 or sound card IRQ 6 - Floppy disk controller IRQ 7 - LPT1 Parallel Port 1 or sound card (8-bit Sound Blaster and compatibles) IRQ 8 - Real time clock IRQ 9 - Free / Open interrupt / Available / SCSI. Any devices configured to use IRQ 2 will actually be using IRQ 9. IRQ 10 - Free IRQ 11 - Free IRQ 12 - PS/2 connector Mouse. IRQ 13 - ISA / Math Co-Processor IRQ 14 - Primary IDE. If no Primary IDE this can be changed IRQ 15 - Secondary IDE These are just a set of standard IRQs. For much more detail check our Ralf Brown's list located at http://www.cs.cmu.edu/~ralf/files.html
What IRQ does COM2 use?
IRQ 3.
What IRQ does LPT1 usually use?
LTP1 should use IRQ7.
What is the IRQ for the floppy disk drive controller?
By default, the IRQ for the floppy disk controller is IRQ 6.
What is the Interrupt Request IRQ assigned to LPT1?
By default IRQ 7 is assigned to LPT1.
What is the address of COM1?
From: http://www.techadvice.com/tech/C/ComPort_TS.htmCom1, IRQ 4, address: 3F8Com2, IRQ 3, address: 2F8Com3, IRQ 4, address: 3E8Com4, IRQ 3, address: 2E8
