0
You need to specify the thread. Though most are between 55 and 60 degrees.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
A pool ball hits the rail at an angle of 30 degrees what is its rebound angle?
http://billiards.colostate.edu/threads/banks_and_kicks.html
What is the difference between thread angle and lead angle also clear it from diagram?
A thread angle is the angle of the threads relative to the shank which is 60 degrees for unified screws The lead angle is the pitch of the screw divided by the circumference of the shank; it varies but is around 3 degrees
When is the angle are said to be in standard position?
When the beginning ray of the angle is on the x-axis.
What is an object that has a right angle?
A standard sheet of paper has a right angle at each corner.
How looks an obtuse angle?
On a standard wall clock, 4:00 is an obtuse angle.
Are standard or metric threads used on Chinese manufactured bicycle pedals?
The threads on bicycle pedals are American Standard.
Why square threads are used in screw jack?
§ Screw threads have better compression strength than other threads. § Due to low thread angle there is no radial pressure on nut. § Due to smaller angle, the lead of screw is less.
Why square threads are used in a screw jack?
§ Screw threads have better compression strength than other threads. § Due to low thread angle there is no radial pressure on nut. § Due to smaller angle, the lead of screw is less.
What is a standard pipe thread?
Called Briggs Standard AKA NPT and the other threads NOT normally used in plumbing is NFT and ASE threads
Angle of thread for different thread?
The angle of a thread of a screw is an angle between the threads and it is the defining factor for the shape of the screw thread.
A pool ball hits the rail at an angle of 30 degrees what is its rebound angle?
http://billiards.colostate.edu/threads/banks_and_kicks.html
What are metric threads?
Metric threads are called that way, because you measure the distance between the threads (at the highest point), in millimeters., As opposed to SAE (standard), which are measured by the number of threads in an inch.
Does a Shocktech regulator fit on an ion paintball gun?
Yes, the Shocktech regulator has standard asa top threads and standard macroline bottom threads, which is what the ION uses
What npt pipe threads full name?
National Pipe Threads or the Briggs Standard NFT = National fine threads NCT National corse threads ASAE America society of auto engineer threads etc
Are the threads on a fan clutch right handed threads or left handed threads for a 2003 jeep liberty sport 3.7?
Standard right hand thread.
Are the threads on the harmonic balancer bolt for a 93 dodge Dakota reverse or standard thread?
Standard.
Are the threads on the bolt that hold the tensioner pulley left or right handed on a 1995 Isuzu Rodeo?
Standard rh threads
