0
1 and 1/2 inches
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you get the take off 90 degree elbow pipe?
Measure to the center of the Ell and decuct for the threads ..
For pipefitters what is the take off on a 6 inch short radius 90 degree ell?
Short Radius 90 degree elbows are the same as pipe size.... Long Radius 90's are pipe size times 1.5.... so a 6" (SR) elbow is 6"... a 6" (LR) elbow would be 9"
What is the take off for a 26 inch 90 degree elbow?
39in.
What Is the take off measurement on a 4inch victaulic 90?
5 inches
What is the take off for a half inch screwed 90 degree elbow?
1/2 inch
How do you get the take off 90 degree elbow pipe?
Measure to the center of the Ell and decuct for the threads ..
What is the take up of a 4 long radius sch steel butt weld 90 degree ell?
9
For pipefitters what is the take off on a 6 inch short radius 90 degree ell?
Short Radius 90 degree elbows are the same as pipe size.... Long Radius 90's are pipe size times 1.5.... so a 6" (SR) elbow is 6"... a 6" (LR) elbow would be 9"
What is the Take off measurements for 90 degree pipe fittings?
If it is 3 in. Then take off 3 in. and so on for what ever size you are use if it is 2 in. then 2 in.
Can you use a ninety on a sink drain?
No. Two 45 degree ell pipes with a space piece to make up the 90 degree ell you need.
What is take off measurement for 90 degree 8 inch pipe?
The take-off for a standard radius 90 is one and one half the diameter of the pipe. Example: 6 inch 90 has a take- off of 9 inches. The take-off for short radius 90 would be the dia. of the pipe. Long radius 90 is 2 times the pipe diameter.
How do you change 0.90 to tenths?
To change .90 to tenths, you take the 0 off of .90 to get .9 (.9=.90)
How did street' originate in the plumbing term street ell?
A "street ell" may have gotten it's name because it describes a 90˚ fitting particularly useful in tight, street ditches. When installing water pipes under a street, or from a water service, again under the street, into a home or business, this street ell allows one to change pipe direction with one less fitting, and in less space, than with a standard ell. A "street ell" may have gotten it's name because it describes a 90˚ fitting particularly useful in tight, street ditches. When installing water pipes under a street, or from a water service, again under the street, into a home or business, this street ell allows one to change pipe direction with one less fitting, and in less space, than with a standard ell.
What is the center of a76 degree mitered steel elbow?
Need more information, but here are some examples for pipe elbows; you need to enter the elbows' centerline radius: 10" steel pipe with a 2R or 10" radius: if it is a 90 degree ell C/L-to-END is 10"; for a 76 degree ell it is 7.81" 10" steel pipe with a 3R or 15" radius: if it is a 90 degree ell C/L-to-ENC is 15"; for a 76 degree ell it is 11.72" The way to calculate this is to draw a right triangle with the smaller angle being 38 degrees (half of the 76 degree angle). The length of the triangle's "side adjacent" to the angle will be the length of the ell's centerline radius (15" in the case of the above 3R elbow). Multiply the tangent of the angle of 38 degrees by the length of the ell's centerline radius to get the length of the ell's "centerpoint-to-end" length.
What is the take off for a 26 inch 90 degree elbow?
39in.
What Is the take off measurement on a 4inch victaulic 90?
5 inches
What is socket weld x pipe?
What it's the take out off 12 inch 90
