0
What else can I help you with?
What is the standard distance between the two holes of a stationery punching machine?
The distance is 7cm.
What is the average distance between black holes?
This is impossible to answer with today's technology. Sorry
What is the formula for pcd dia 100 for 8 holes?
The formula to calculate the Pitch Circle Diameter (PCD) for a given number of holes is: [ \text{PCD} = \frac{d}{\sin\left(\frac{180^\circ}{n}\right)} ] where ( d ) is the distance between holes (or the diameter of the circle on which the holes are located), and ( n ) is the number of holes. For a PCD of 100 mm with 8 holes, you would use this formula to determine the spacing and arrangement of the holes around the circle.
What is a 5.5 lug bolt pattern?
Its the size and distance between holes on your rim. Hole Pattern.
What is the difference between line drilling and presplitting drilling?
Pre-splitting holes are charged, whereas line-drilling holes are not. Pre-splitting holes contain less explosive than the rest of the holes in the blast area.The blast holes directly adjacent to the line-drilling holes are charged to about 50% of that of the rest of the blast area.The diameter of the holes in pre-splitting tend to be much larger than those in line-drilling. Pre-splitting holes diameter ranges from 50mm - 100mm for civil engineering purposes while larger holes are used (some larger than 300 mm) for mining.Line-drilling holes usually have a diameter less than 75mm.Pre-splitting spacing is about 10-20 times the hole diameter.Line-drilling holes are spaced about 2-4 times the diameter of the hole.The holes in line-drilling are spaced much closer together than those of pre-splitting.
What is a transverse rivet pitch?
Transverse rivet pitch is the distance between the centers of adjacent rivet holes in a transverse row across a given structure. It helps ensure proper spacing and alignment of rivets for structural integrity and load distribution.
What is the formula for marking holes on a flange?
pcd152mm,number of holes 8 calculate the distance of holes
Will a 5x139.7 bolt pattern fit a 5x114.3?
It will not fit without an adapter. The 5 in that number refers to the quantity of bolt holes. The 139.7 refers to the distance between adjacent bolt holes in the pattern. In other words the distance between the upper most bolt hole and the lowest bolt hole in the pattern. Obviously, if the distance between the bolt holes is off by 25.7mm, this wheel will not fit. The only option is to purchase a bolt pattern adapter commonly referred to as wheel adapters, to change the bolt pattern of your vehicle.
What are the uses of dividers?
Once the distance between the legs is set to the desired gap, the dividers can be pivoted from leg to leg, and the distance between the leg points will always be exactly the same - useful in carpentry and machining for spacing holes, for example, exactly the same distance apart.
Why is a diamond pin locator used with a round pin locator?
It's more difficult to mount a workpiece on two round pins than on a round and a diamond. A diamond pin is meant to handle the variation (tolerance) of the distance between the two locating holes. Two round locating holes with diameters closely sized to the locating holes diameters may not always accept the allowable distance variation between them.
Will a 5x130 bolt pattern fit a 5x112 bolt pattern?
no 5=how many holes/bolts and 130mm or 112mm relates to the the distance between bolts. if you use the 5x130 on the 5x112 the holes will not match up because the holes are more spread out than the 5x112.
What is the capacitance between a plate and a grid when the dimensions of the holes in the grid are comparable with the distance between the grid and the plate?
== == The game board is made up of a 15-by-15 gridof cells.
