answersLogoWhite

0


Best Answer

4 1/2 inches (a 2x4 is only 3 1/2" actual)

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the thickness of a partition that is framed with two by four inch studs and finished with a half inch gypsum board on both sides?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Math & Arithmetic

How much is the price of linear meter on gypsum board?

The answer depends onthe quality (including width and thickness) of the board, andwhere in the world you are trying to buy it.


Is code 2095 of gypsum board?

yes IS code 2095 is for gypsum plaster boards In this..IS 2095-PART1 PLAIN GYPSUM PLASTER BOARDS IS 2095- PART 2 COATED/LAMINATED GYPSUM PLASTER BOARDS IS 2095- PART 3 REINFORCED GYPSUM PLASTER BOARDS


Is 2 parts gypsum powder to 1 part water a ratio mixture?

yes. a ratio of two to one.


How do you figure square feet of drywall?

You can both estimate the total square feet of drywall, also known as gypsum board, you'll need and the number of sheets. ... Drywall needed = total area/sheet size. Multiply the length and height of one wall. ... Record the area. Repeat this process for all walls.


What is the best way to hang a heavy picture on a wall with no stud behind it?

If the wall is made of drywall/sheetrock/gypsum wallboard, use one or more screw anchors. This is a plastic cone that comes with a screw. You drill a hole, push in the plastic cone, and use a screw driver to thread the screw into the anchor. Typically the instructions are on the package of screw anchors. Larger anchors will hold more weight, but the size of screw anchor you can use is limited by the thickness of the drywall, so the thickness of the drywall limits the weight it will support. It might be possible to use multiple anchors, but that might require some calculation and planning. If the wall is not drywall but plaster and lathe, you can use a lag bolt. This is a long threaded rod with a spring-loaded folding wing-like thing that threads on the end. To use it you drill a hole large enough to accommodate the folded wing. Push it through the hole, and the wings expand and grip the inside of the wall. Turn the screw to pull it up tight. For a brick or stone wall, there are special masonry drill bits to drill a hole, and anchors of plastic or metal that go in the hole. These expand to grip the wall when a matching screw is driven in. If the wall is not too thick, you could use a lag bolt like above. For a wood wall, simple wood screws should work. For smooth tile or glass, consider any epoxy adhesive.

Related questions

What is the procedure to make a gypsum partition?

Gypsum partitions are created for interior solutions, not on Windows XP.


What is the difference between white and green drywall?

The difference is the thickness and the type of paper covering the gypsum.


Standard thickness for gypsum board for ceiling or walls when framing is 16 O. C. or 24 O.C.?

Nominal 1/2" thick is standard.


How much is the price of linear meter on gypsum board?

The answer depends onthe quality (including width and thickness) of the board, andwhere in the world you are trying to buy it.


What is the acoustic value (desible gained ) by increasing the mass of gypsum board?

You may expect an increase in noise attenuation of about 3dB for each doubling of the mass of your gypsum board. Using boards of different thickness on opposite faces of the wall will further increase the sound loss.


What is fireproof sheetrock and is it still used?

Sheetrock is a brand name for a brand of gypsum board, and by it's nature, it fire resistant (it is made of ground up gypsum rock, mixed with water, extruded in a ribbon). Check with a building supply dealer for fire code rated drywall- it will be the correct thickness.


Is gypsum metallic?

No, gypsum is not metallic.


Where is the Gypsum Public Library in Gypsum located?

The address of the Gypsum Public Library is: 743 Valley Road, Gypsum, 81637 9722


Where is the Gypsum Community Library in Gypsum located?

The address of the Gypsum Community Library is: 521 Maple St., Gypsum, 67448 0019


Is gypsum board a metal?

No, gypsum board is made from gypsum plaster and paper. Gypsum is a material very similar to school board chalk.


Where you find gypsum?

Gypsum is found sea.


What color is the gypsum rock?

the color for the gypsum rock is lik ewhite