0
What is the total amps running two 200 amp 3 phase in parallel?
Wiki User
∙ 11y ago
Usually when a rate of current is stated on a 3 phase board it means per phase. Therefore, you woiuld be able to draw up to 200A per phase, providing the supply authorities incomer permits this. It should be noted that, it is better to balance the phases with each other as far as the loading current goes, this will keep your max demand lower and your bills down.
Wiki User
∙ 14y ago
Wiki User
∙ 11y agoIf the two panels are paralleled and are fed from a 200 amp splitter then the over current protection up stream from the splitter has to be rated at no more than 200 amps.
Add your answer:
Earn +20 pts
What is the running amps of a 45 kW motor?
To answer this question the motor's voltage must be stated and whether the supply voltage is single phase or three phase.
How many amps on 3 phase 225 amp panelboard each phase?
It means 225 amps on each phase.
What is conversion of 4.6kva to kw?
Single-phase, 2.5 amps; three-phase 1.443 amps.
What amperage will a range with a rating of 12.9 kw draw?
This depends on what voltage the range is rated for and if it is single phase or three phase. At 220 volts single phase it is about 60 amps, 240 v single phase , 53 amps and at 480 v three phase about 15 amps.
What is the formula of total amps?
There is no 'formula' which defines the ampere. The ampere is defined in terms of the resulting force between two parallel, current-carrying, conductors, due to the magnetic fields surrounding those conductors.
What is the running amps of a 45 kW motor?
To answer this question the motor's voltage must be stated and whether the supply voltage is single phase or three phase.
How many amps on 3 phase 225 amp panelboard each phase?
It means 225 amps on each phase.
What is circuit breaker rating when electric load of a machine is 11.5 kW?
This question cannot be answered as asked. you would need to know also the voltage and phasing. Assuming we are dealing with 120-volt, single phase, 11,500 watts would be 55-running amps. Assuming we are dealing 208-volts, three phase, 11,500 watts would be 32 running amps and assuming we are dealing with 250-volt three phase, 11,500 watts would be 26.5 running amps. I hope I have answered your question.
What is conversion of 4.6kva to kw?
Single-phase, 2.5 amps; three-phase 1.443 amps.
How many amperes for 3 phase 220v 5 tonner?
50 Amps Single Phase 20 Amps Three Phase
If two electrical loads are connected in parallel with each other and each load draws 6 amps what is the total current of the circuit?
12 Amperes is.
What is 7kva in amps?
In a standard 3 phase system in North America, 7kVa would be equivalent to 19.5 amps on each phase. The equation is: 7kva*1000/208v/1.73=19.45 amps (3 phase)
What amperage will a range with a rating of 12.9 kw draw?
This depends on what voltage the range is rated for and if it is single phase or three phase. At 220 volts single phase it is about 60 amps, 240 v single phase , 53 amps and at 480 v three phase about 15 amps.
What is the formula of total amps?
There is no 'formula' which defines the ampere. The ampere is defined in terms of the resulting force between two parallel, current-carrying, conductors, due to the magnetic fields surrounding those conductors.
How many amps 50 hp 240 3 phase?
106 amps
What is the amps of a 7.5 hp 480 volt 3 phase?
88 amps
How many amps in 17000 watts?
At 240v single phase it's 70.8 amps. If it runs on 2 wires plus ground, take the voltage rating of the equipment and divide that into the watts to get amps. At 480v 3 phase it's 25.8 amps. At 208v 3 phase it's 47.2 amps. <<>> There are zero amps in 14 kW. A voltage needs to be stated. I = W/E, Amps = Watts/Volts.
