Q: What is the total output length of linear convolution sum?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

Add the length, width, and height.

Determine length (linear) and how wide is it. Multiply the length times the width and this will give you the total area or square footage. Here is another example: A product is sold by the 20 foot long (linear feet) roll. The specifications state that the product is 2 foot wide x 20 feet long. It is in fact 20 ft. x 2 ft. wide or 40 square feet per roll.

Partial measures output/(single input)Multi-factor measures output/(multiple inputs)Total measure output/ (total inputs)Productivity =(Outputs/inputs)

It is the total length "outline" of a figure. For example, the total length of the outline of a square, its perimeter, is the total length of the four sides of the square.

Efficiency = ( useful energy output / total energy input ) x 100

Related questions

570 linear feet is 570 regular feet. Linear refers to the total length of an item supplied in length smaller then the total length. Eg 6 lengths of timber at 10 feet each add up to 60 linear feet.

Outside linear dimension is the total sum of length, width and height. For most airlines, one can not have outside linear dimension of 62 for a suit case.

Add the length, width, and height.

Multiply the cost per unit (8) times the length (10.5) = 84

You must first draw a floor plan and figure out how the carpet will be laid out. You must then account for waste and seam placement. After laying out the entire job, add up the individual cuts and you will have the total linear feet that needs to be ordered.

Outside linear dimension is the total sum of length, width and height. For most airlines, one can not have outside linear dimension of 62 for a suit case.

Linear inches is a term used by the airline industry in order to measure baggage allowances. The linear inch measurement is determined by adding the length, width, and height of the item in inches. For instance a 20" square box that is 5" tall would be 20 + 20 + 5 arriving at a total of 45 linear inches.

Measure the length of each wall. Add those figures up and you get Linear footage. Divide the total linear footage by the width of the panels and round up, this is the number of planks you will need.

A growth in the total output produced.

Negative

The perimeter of the room - the total length around its edges - is 2*(10+15) = 50 units of length. It is not possible to give the answer in feet because the units for the measure of the room are not given.

Total power output (Total RMS output): 1000 watts