More distance, less force
a wheel barrow. the part that holds stuff would be the inclined plane, the wheel would be a wheel and axle, and the part you pick up off the ground to make it go would be a lever
cartasian plane off the coordinite plane is 2x+3=n that sould be the equations
15 degrees
A plane in the air posseses gravitational potential energy or stored energy. If the pilot shuts the engine off the plane releases that energy.
how to plane a countertop bevel edge The longer the edge the longer the plane you should use. this will help leave a consistent result. set the plane so that you are not taking more than a few thousandths of an inch off each stroke. hold the plane at a 45 degree angle to the surface (most common) and make long steady strokes till you achieve the depth of bevel you desire. Its also a good idea to scribe a light pencil line to indicate the bevel depth.
Why is the wedge and screw actually an inclined plane? Well, screws are actually tapering, if you take the ridge off and lay it flat. The screw is actually nothing but an inclined plane wrapped around a small pole. The wedge is an inclined plane because it starts at a point, then goes up, getting thicker, like an inclined plane. It's just that a knife's not used to lift a box of glasses onto a train. Imagine using an inclined plane as a knife!
Why is the wedge and screw actually an inclined plane? Well, screws are actually tapering, if you take the ridge off and lay it flat. The screw is actually nothing but an inclined plane wrapped around a small pole. The wedge is an inclined plane because it starts at a point, then goes up, getting thicker, like an inclined plane. It's just that a knife's not used to lift a box of glasses onto a train. Imagine using an inclined plane as a knife!
Some roofs are flat, but most are inclined to let the water run off.
Some roofs are flat, but most are inclined to let the water run off.
A trade-off is obtained between the force required to move an object and the distance through which it is moved. You can use less force over a longer distance so that you can raise an object that you would not be able to lift.The efficiency of a plane depends on the work done in overcoming friction.
a wheel barrow. the part that holds stuff would be the inclined plane, the wheel would be a wheel and axle, and the part you pick up off the ground to make it go would be a lever
For most products you can buy, there is a trade-off between quality and price.
Inclined planes are simple machines whose use enables a trade-off between mass and distance. They need no be fixed except that it may be sensible to anchor them during use.
It's a wedge for sliding between the food and a pan or plate. An inclined plane as food slides off and the handle serves as a lever.
im looking for answers also.........
urnium
It is not a simple machine. Simple machines are levers, inclined planes, wheel and axle, screws, wedge, and pulley. I water pump uses air pressure and suction.