answersLogoWhite

0


Best Answer

3.14159265358979323846

The next digit is a 2, so that last six is both the correct digit, and correctly rounded.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the value od pi to 20th decimal places?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Math & Arithmetic

What is the value of x in the equation 8 42x?

Without an equality sign the expession given is not an equation. But if you mean 8 = 42x then the value od x is 8/42


What is OD plus 2.75?

OD is Outside Diameter - at least when you are talking about pipe...


How do you find cylinder ID when the OD is known?

There is no corelation between a cylinders ID to OD.


Why pipe NB is different with OD up to 12 inches?

Based on the NPS and schedule of a pipe, the pipe outside diameter (OD) and wall thickness can be obtained from reference tables such as those below, which are based on ASME standards B36.10M and B36.19M. For example, NPS 14 Sch 40 has an OD of 14 inches and a wall thickness of 0.437 inches. However the NPS and OD values are not always equal, which can create confusion.For NPS â…› to 12 inches, the NPS and OD values are different. For example, the OD of an NPS 12 pipe is actually 12.75 inches. To find the actual OD for each NPS value, refer to the tables below. (Note that for tubing, the size is always the actual OD.)For NPS 14 inches and up, the NPS and OD values are equal. In other words, an NPS 14 pipe is actually 14 inches OD.The reason for the discrepancy for NPS â…› to 12 inches is that these NPS values were originally set to give the same insidediameter (ID) based on wall thicknesses standard at the time. However, as the set of available wall thicknesses evolved, the ID changed and NPS became only indirectly related to ID and OD.For a given NPS, the OD stays fixed and the wall thickness increases with schedule. For a given schedule, the OD increases with NPS while the wall thickness stays constant or increases. Using equations and rules in ASME B31.3 Process Piping, it can be shown that pressure rating decreases with increasing NPS and constant schedule.[note 1]


What is the OD of 6 PVC?

6