Study guides

Q: What is the volume of an object if you dropped a graduated cylinder and the water in the cylinder went from 40 ml to 65 ml?

Write your answer...

Submit

Related questions

First, you need to get a graduated cylinder filled up with water and record the volume.Next, you put an irregularly object into a graduated cylinder fill with water. Then, you measure the volume of the graduated cylinder with the irregularly shaped object in it.Finally, you subtract the highest volume which was the volume of the graduated cylinder with the irregularly shaped object in it by the regular volume of the graduated cylinder which is the smallest volume and there's your answer.

We usually call this procedure water displacement or just displacement. The object will take up space when dropped into the graduated cylinder. The difference between the two measurements will give the volume of that object.

To determine the volume of an irregular object using graduated cylinders, you fill a graduated cylinder with water right to the top, then submerge the object in the water. Measure the water that overflows using a second graduated cylinder, and read the water level in it in cc's or cubic inches. That is the object's volume.

Step 1) Fill the graduated cylinder with water to a specific volume (example: 50ml).Step 2) Drop the irregular shaped object into the graduated cylinder.Step 3) Measure the new level of the water in the graduated cylinder.Step 4) The difference in volumes in the graduated cylinder equals the volume of the irregular objectexample:original volume of water in cylinder = 50mlvolume of water in cylinder with irregular object = 55ml55ml - 50ml = volume of irregular object in the water = 5ml

You can use a graduated cylinder to measure an object's volume.Fill the cylinder with water up to some convenient mark that's deeper than the object, and notethe volume of water in the cylinder. Than immerse the object in the water in the cylinder and notethe volume again. The difference between the two volume readings is the volume of the object.In my house, we have graduated cylinders which we refer to as our "measuring cups".

By pouring a set amount of water into the cylinder then addin the object and seeing how much the volume changes. The amount of change is the volume of the object.

You can find the volume of an object bigger than the graduated cylinder by using the displacement method using a beaker. The object also can be measured with a rules length, width, and height.

not quite. you can measure volume in a graduated cylinder. you can use a scale, water, and a graduated cylinder to find out the density of an object by filling the graduated cylinder to an easily calculated point (250) then dropping your object in the water making sure none splashes out then measure the difference, then weigh it and divide the mass by volume to get density.

First, fill a large graduated cylinder up with water. Then, measure how much water is in the graduated cylinder before you put the irregular object in. Last, measure how much water is in the graduated cylinder after you put the irregular object in, then subtract the two numbers and that is the volume of the irregular object.

In order to measure the volume of an irregularly shaped object, you use water displacement. You can fill a graduated cylinder with water to a certain amount and record that initial volume. Then place your object into the cylinder, and record the second volume. Subtract the first volume from the second volume, and that is the volume of the irregularly shaped object. If the object is too big for a graduated cylinder, you can use an overflow can, which has a nozzle that allows excess water to leave the can. Fill the can with water until all of the excess water leaves the nozzle. Place a beaker under the nozzle and place the object inside the overflow can. The excess water will flow from the nozzle into the beaker. Then place the water in the beaker into the graduated cylinder. The volume in the cylinder is the volume of the object. The graduated cylinder measures volume in mL. One mL = 1cm3, so you can record the volume of the solid in cm3.

you get the volume of the water and then the volume of the object in the water, then subtract the two and your answer is the volume of the object

length x width x height or put water in a graduated cylinder, and measure the volume of water. then place the object in the graduated cylinder and record the new volume of the water. subtract the old volume from the new, and that is the volume of the object.

To find the volume of an irregular object such as a rock, you have to use displacement. If you place the object in a graduated cylinder filled with water, the volume of the object is equal to the amount of water that the object displaces. For example, if a graduated cylinder is filled with 100mL of water, and you place an object such as a rock and the water rises from 100mL to 106mL, then the volume of the rock is 6.

If no water splashed out of the graduated cylinder and was lost, and if the rock is completely submerged, then its volume is 5.2 cm3 .

displacement - invented by Archimedes. Completely fill a large volume of something with water. Have a spout to channel all excess water. Place a graduated cylinder under the spout. Place irregular object in the large volume filled with water. The volume of the irregular object will displace an equivalent volume of water into the graduated cylinder. The measured volume in the cylinder is the volume of the irregular object.

Yes you can. You put liquid (usually water) in the graduated cylinder. Then record how much liquid you put in it. Next, put the object in the graduated cylinder. Look at where the water level is now. Take that number and subtract the amount of water you put in and that should give you the approximate volume of the object.

The graduated cylinder is used to measure volumes of liquids and powders in laboratories or in the kitchen.

3.0 cm3=3.0 mL; therefore the new volume is ,32.0mL+3.0ml=35.0mL

One way to measure the volume of an irregular object is to use a graduated cylinder. Fill the cylinder about half-way with water, and measure the volume. Then, place the object in the cylinder and measure the new volume. Subtract the first from the second to find the change in volume of the water. This change in volume is the voume of the object. Unfortunately, this method will not work for all objects as some are to large to fit in a graduated cylinder and some will dissolve in water, but it is very usefull in most situations.

The volume of a solid object such as a rock or pebble can be determined by submerging it in a liquid in a graduated cylinder or other container. The difference in the volume of the liquid is the volume of the object.

by measuring the volume of water that the object displaces.

Type your answer here... A graduated cylinder is a piece of laboratory equipment used to accurately measure the volume of an object.

by a graduated cylinder (don't rely on this answer i am not sure of it)

Use a graduated cylinder to precisely measure volume

Its volume.