Want this question answered?
To determine the volume of an irregular object using graduated cylinders, you fill a graduated cylinder with water right to the top, then submerge the object in the water. Measure the water that overflows using a second graduated cylinder, and read the water level in it in cc's or cubic inches. That is the object's volume.
length x width x height or put water in a graduated cylinder, and measure the volume of water. then place the object in the graduated cylinder and record the new volume of the water. subtract the old volume from the new, and that is the volume of the object.
Yes. Fill the cylinder with a specific amount of water and write that amount down. (Any amount, as long as the keys will fit in without the water overflowing, and there is enough to make a difference.) Then put the keys in. Write down the new volume displayed by the graduated cylinder. Subtract the first volume form the initial volume, (this is change in volume), and you will get the volume of the keys.
By pouring a set amount of water into the cylinder then addin the object and seeing how much the volume changes. The amount of change is the volume of the object.
it is probably called figure it out, it is curved because glass is sticky. When you measure the volume from a graduated cylinder, measure at the bottom of it. It is called the meniscus.
To determine the volume of an irregular object using graduated cylinders, you fill a graduated cylinder with water right to the top, then submerge the object in the water. Measure the water that overflows using a second graduated cylinder, and read the water level in it in cc's or cubic inches. That is the object's volume.
A graduated cylinder is used to measure the volume, or capacity of water. Or to just measure Water.
You can put water in the graduated cylinder and drop the solid in and see how much the water rises
Use a graduated cylinder and the water displacement method. Pour the sample of water in the graduated cylinder and find its meniscus. That is its volume.
The unit of measurement that a graduated cylinder uses is the volume/mass of water.
Fill the graduated cylinder with water, and measure the volume. Now put the item in, measure the water's volume again, and take the difference
If the object in question is water proof, and small enough. You can measure the amount of displaced water when it is placed in a tank full of water, this may not work for a lot of things but it can help when attempting to measure some objects.
Water in a glass graduated cylinder adheres to the sides of the cylinder, forming a meniscus which is an upward curve. When reading volume in a cylinder, look at the meniscus at eye level. Read the volume at the bottom of the curve.
a graduated cylinder
not quite. you can measure volume in a graduated cylinder. you can use a scale, water, and a graduated cylinder to find out the density of an object by filling the graduated cylinder to an easily calculated point (250) then dropping your object in the water making sure none splashes out then measure the difference, then weigh it and divide the mass by volume to get density.
Pour it into a graduated cylinder and read off the volume.
To find the volume of water you must put it in a graduated cylinder. Read the measurements.