If 6.25/12 cu ft = 9.5 lb, then 1 cu ft = 12/6.25 x 9.5 lb = 18.24 lb
4 pounds?
Cement weighs about 150 punds per cubic foot, and there are 1728 cubic inches in a cubic foot, so if the block is solid then it weighs 150x8x8x12/1728 = 67 pounds
the block completely stripped weighs 164 pounds
The volume of the block of ice is 2ft * 2ft * 2ft or 8 ft3. The equivalent weight of 8 cubic feet of water is 8ft3 * 62.5 lb/ft3 or 500 lbs. To find the weight of ice take 92% of the equivalent weight of water or 0.92 * 500 lbs = 460 lbs
Bruno Block is 5 feet 9 inches tall. He weighs 185 pounds. He bats right and throws right.
The most obvious diff is 350 CUBIC inches is much small that 496 cubic inches. Also likely the 350 is a small block where as the 496 is a big block. The 496 will be a physically appearing bigger motor if that is the case. With great displacement also comes greater power or power potential. A mildly modified 350 can produce more power than a stock 496. Big Block Chev weighs in at around 675 Pounds and a 350 small block weighs in at about 575 pounds.
Mine weighs about 3400 pounds. Small block with a 400 trans and a 3/4 tank of gas.
The standard CMU (concrete masonry unit) in north America weighs 40 pounds. -There is a lighter, costlier version with pumice instead of sand. This weighs 35 pounds.
If the block is on or near the Earth's surface, it weighs 9.807 newtons (2.205 pounds).
the weight of my 427 Chevy big block. Which is the same as the 396, 454. This is a bare block we are speaking about. the total weight of a bare block Is right at 200 pounds.
the average pyramid block weighs about 5,600lbs
The weight of a small block Chevrolet cylinder head is 65 ft-lbs. Refer to your owner's manual or seek the help of a car expert if necessary. Obviously the above person didn't understand the question. A cast iron cylinder head, fully assembled, for a small block Chevy weighs 49 pounds. A cast aluminum head weighs 25 pounds.