Skunks
two inches
If a SMALL pizza is 10 inches in DIAMETER, and the price of a small pizza is usually around $10, then that's what the common theory is of both diameter and price.
4 lbs 3 oz about 1,987 decimeters in roundness
7.00
Rat holes are small openings in the ground or walls that are typically about 2-4 inches in diameter. They can be identified by their size, shape, and the presence of gnaw marks around the entrance. Rat holes may also have loose dirt or debris around them, and may be accompanied by a musky odor.
The dimensions of a 2 Morse taper are as follows: the small end diameter is 0.700 inches, the large end diameter is 0.938 inches, and the taper length is 2.25 inches.
The dimensions of a 3 Morse taper are as follows: the large end diameter is 0.938 inches, the small end diameter is 0.624 inches, and the length is approximately 2.5 inches.
The dimensions of a Morse Taper 1 are as follows: the small end diameter is 0.356 inches, the large end diameter is 0.475 inches, and the taper length is 2.25 inches.
The dimensions of a Morse Taper 2 are as follows: the small end diameter is 0.700 inches, the large end diameter is 0.938 inches, and the taper length is 2.25 inches.
Depending on the design and purpose of the nuclear bomb this varies dramatically. Publicly released data shows that the US has built ones as small as about 11 inches in diameter and 31 inches long (Davy Crockett in image above) to ones as large as 80 inches in diameter and 244 inches in height (1952 Ivy Mike test device). Nuclear artillery shells have been built as small as 5 inches in diameter and 24.5 inches long to as large as 11 inches in diameter and 54 inches long. Nuclear landmines have been built as small as 11 inches in diameter spheres, but the most typical size is similar to a standard "55 gallon oil drum".
A diameter is the width across the middle of a circular shape: it can be small (for an atom) or large (for a supergiant star). So the question makes no sense at all.
up to 5 ft in diameter