Half the width of your finger.
To convert from millimeters (mm) to meters (m), divide the value in millimeters by 1000. So, to convert 488 mm to meters, divide 488 by 1000: 488 mm ÷ 1000 = 0.488 m.
If the scale Merriam of the Sun is 3000 mm, then the scale diameter of Saturn would be 274.2 mm.
The scale diameter of Jupiter would be approximately 31.8 mm if the sun is represented as 3000 mm in diameter on the same scale.
1.5 cm
There are 10 mm in 1 cm, so 1.2 cm would equal 12 mm.
1.5 cm equals 15 mm.
784Direct Conversion Formula2,430mm* 1 in25.4 mm= 95.66929134in
About 3 inches
The least count (LC) of vernier calipers is the smallest measurement that can be accurately read using the instrument. It is determined by the difference between one main scale division and one vernier scale division. For a typical vernier caliper with a main scale division of 1 mm and a vernier scale that has 10 divisions corresponding to 9 mm on the main scale, the least count would be 0.1 mm (1 mm - 0.9 mm). This means that measurements can be taken with a precision of 0.1 mm.
Venus has a diameter of about 12,104 km, whereas the sun has a diameter of about 1,391,000 km. If the sun's diameter is 3000 mm at some scale, then the scale diameter of Venus would be about 12.32 mm.
1 km equals 100,000 mm
Unless Johann Nepomuk Maelzel's metronome was incorrectly calibrated, since 200 is the largest of those three numbers, MM = 200 would be the fastest speed, assuming you are counting crotchet beats exclusively.