4/0 copper phases and neutral
It means 225 amps on each phase.
A 3/0 copper conductor with an insulation rating of 90 degrees C is rated at 225 amps.
A 3/0 copper conductor with an insulation factor of 90 degrees C is rated at 225 amps.
The current largest aircraft (both in overall size and weight) is that Anatov An-225.
180 amps. Assuming the panel will be loaded only 80%.
It means 225 amps on each phase.
A 3/0 copper conductor with an insulation rating of 90 degrees C is rated at 225 amps.
Lake Geniva in Switzerland is 225 sq mi in size
Pep Boys Auto Parts, Tires and Service can get them 6521 Roswell Rd, Atlanta, GA - (404) 843-0622 225/50/15
Use AWG #1 copper service entrance wire and #4 copper ground wire.
NO, rim size is incorrect.
The equation you are looking for is amperage = kva x 1000/1.73 x voltage.150 x 1000 = 150000/1.73 x 480 = 150000/830 = 180 amps for primary side of transformer.150 x 1000 = 150000/1.73 x 240 = 150000/415 = 361 amps for the secondary side of the transformer.The electrical code requires transformers and motors conductors to be sized at 125% of the rated amperage.So 180 x 125% = 225 amps, and 361 x 125% = 451 amps.A 3/0 copper conductor with an insulation factor of 90 degrees C is rated at 225 amps.A 600 MCM copper conductor with an insulation factor of 90 degrees C is rated at 475 amps.Parallel 3/0 copper conductors with an insulation factor of 90 degrees C will give a capacity of 450 amps.There is no 2 phase 240 volt secondary.Any two legs of a three phase system are classified as single phase. Single phase 240 volts can be obtained from any of the following transformer tap connections, A-B, B-C, C-A.
The factory size is: 225/60-16
The factory size is: 225/70-15
16's 225 16's 225
225/60R16 for GT and 225/70R15 for SE
A 3/0 copper conductor with an insulation factor of 90 degrees C is rated at 225 amps.