0
10 mm2 cross section should be sufficient (#6 wire?)
Wiki User
∙ 12y ago
Wiki User
∙ 10y ago10 kw or 10,000 watts divided by 240 volts equals 41.6666 amps. 8 gauge is borderline so you will need 6 gauge wire to be safe.
Add your answer:
Earn +20 pts
What size of cable wire used for 500 kva transformer 240 volt 3 phase?
A 10 mm cable is most commonly used for a 500 KVA transformer, 240 volt, 3 phrase. The size of the wire that is used in a transformer is based on the voltage.
What wire size for 240 volt at 60 ft run?
The question is irrelevant if you don't include the amperage.
Does 240 volt have a neutral wire?
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
What size aluminum wire needed for 30 amp at 240 volt for 500 feet underground?
A 1/0 aluminum conductor will limit the voltage drop to 3% or less when supplying 30 amps for 500 feet on a 240 volt system.
What size wire and breaker for a 240 volt single phase 20 kw electric furnace rated at 83.3 amps?
AWG #3 copper.
What wire size for 70 amp service at 240 volt?
4 copper
What size of cable wire used for 500 kva transformer 240 volt 3 phase?
A 10 mm cable is most commonly used for a 500 KVA transformer, 240 volt, 3 phrase. The size of the wire that is used in a transformer is based on the voltage.
What wire size for 240 volt at 60 ft run?
The question is irrelevant if you don't include the amperage.
Is a 220 volt electrical power wire the same as a 240 volt electrical power wire?
Yes 220 & 240 are considered the same.
Does 240 volt have a neutral wire?
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
Can you wire a 240 volt window ac from a 277 volt feed?
no
What kind of wire for double pole for air condition?
The type and size of a wire for a 240 volt air conditioner will depend on the amperage the unit draws.
What size wire for neutral in a 240v 30 amp circuit?
Answer for USA, Canada and countries running a 60 Hz supply service.240 volt two wire circuits loads do not need a neutral to operate. A three wire 240 volt circuit that needs a neutral, will have a neutral the same size as the current carrying conductors. In this case a #10.
What wire size 240 volt 21 amps 150 foot run?
A #10 copper conductor will limit the voltage drop to 3% or less when supplying 21 amps for 150 feet on a 240 volt system.
Will splicing a 3 wire 240 volt compressor with a 4 wire 240 volt male end damage compressor motor?
It could if you don't get the terminals and motor wires on the correct terminals.
How do you run 4 prong 240 volt outlet?
you must run the proper size wire based on the ampacity needed, wire must have four conductors including the gound
Can you wire up a 240 volt single phase water heater to 277 volt single phase?
no
