AWG 16
The correct size fuse needed is based on the size wire used in the circuit. The size wire needed is based on the load that will be applied to the circuit. 1. AWG 14/2 wire = 15 amp fuse 2. AWG 12/2 wire = 20 amp fuse 3. AWG 10/2 wire = 30 amp fuse 4. AWG 8/2 wire = 40 amp fuse
Use a 20 amp fuse or breaker.
A 40-amp fuse is typically recommended for 8-gauge wire. It's important to follow the manufacturer's recommendations for fuse sizes based on the specific application and electrical load. Using the correct fuse size helps protect the wire from overheating and potential damage.
When ever a wire is changed, change it by the same type, rating or capacity of wire.
wrong size fuse. wire from fuse to rear defrosted damaged and shorting to the body. wire at actual window shorting to body.
Almost any size wire will handle the 4.2 amps. BUT...as with any wiring, you must look at the over current device to determine the proper size. You need to determine which fuse in the fuse panel protects that circuit and use a wire that is appropriate for that size fuse.
The appropriate size of 100 amp copper wire needed for electrical installations is typically 3/0 AWG (American Wire Gauge).
For a 60 amp electrical circuit, the appropriate size of copper wire needed is typically 6 gauge.
The only safe way to change your (fuse/breaker) would be to check your wire size and your load size. Fourteen guage wire is rated for a maximum capacity of 15 amps, if your wire size if 12 guage copper then the answer to your question is yes you can change your (fuse/breaker) to a 20amp. You should also call a qualified electrician to install your (fuse/breaker)
The wire size needed for a 180' run depends on the voltage, current, and type of installation. It is recommended to consult the National Electrical Code (NEC) and a professional electrician to determine the appropriate wire size to ensure safety and compliance with regulations.
what size wire would be required for an ak012 with a power supply of 208/240-3-60 hz
Any wire size larger that a # 18 AWG can be fused at 2 amps.