0
What two sets of data does every folder and file on an NTFS partition list?
Wiki User
∙ 12y ago
read and execute
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How much data can be stored in folder in ntfs partion?
The type of partition is irrelevant to how much data can be stored. A partition can hold as much data as has been designated on the hard drive during the creation of the partition. The size of your hard drive determines how large the NTFS partition can be.
Can you convert FAT32 to NTFS with Data?
yes But conversion from NTFS to FAT32 is not possible. One has to delete the partition and recreate FAT32 partition . Data will be lost in the process.
6 Why is an NTFS partition more secure than FAT32?
NTFS prevents changes from unauthorized users and prevents them from reading data from a computer. Where as FAT32 does not
How do you use minitool power data recovery software to recover data from my corrupt partition?
The Power Data Recovery website has step-by-step directions on how you use the minitool power data recovery software to recover data from your corrupt partition. The steps are different depending on the partition (FAT32 or NTFS).
Which of the two raid1 and raid 5 is better under ntfs?
raid 1 because RAID 1 device maintains a mirror of all the data in a partition on another partition of the disk on the array and NTFS support partitioning of disks
What is different between FAT?
NTFS :- If you would be created partition through NTFS that will be show more security options and encryption. FAT :- If you would be created FAT through partition that will not show more options, which you need to secure your data.
Should you change a fat32 partition to ntfs?
Probably not. There is a decent chance of corruption / data loss. it is better to back up your files, delete the partition, and create a new NTFS partition instead. ---------- Depends. It's recommended that you back up any important data on the disk. The down fall with FAT32 and NTFS is that FAT32 cannot interpret anything larger than 32GiB Volumes on the Hard Disk. FAT32 Volumes are becoming the primitive Format. However, older machines which use obsolete hardware won't be able to understand the NTFS Structured Volumes. xyr0x
Why is an NTFS partition more secured than FAT32?
NTFS (New Technology File System ) prevents changes from unauthorized users and prevents them from reading data from a computer.NTFS (New Technology File System) automatically encryptsfiles.
A technician needs to upgrade the file system on a Windows XP computer from FAT32 to NTFS which course of action should be taken to upgrade the file system to NTFS?
Windows XP has a utility to convert a FAT32 system to NTFS. However, to avoid the risk of possible data loss, it is best to back up all data, format the drive with an NTFS partition, and perform a clean install. Good answer but the correct answer is by Running the Microsoft Convert utility.
What does NTFS Data Recovery do?
Use professional mini tool data recovery tools to easily handle NTFS Data Recovery
What are the features of Norton Partition Magic?
The primary features of Norton Partition Magic are it's ability to re-size partitions of various formats, merge adjacent partitions and modify the cluster size of FAT16, FAT32 and NTFS paritions, all without loss of data.
What does the Microsoft Convert utility do?
Windows supports two disk file systems: the FAT file system and the NTFS file system. This article explains how to convert a FAT partition into an NTFS partition, and the considerations to take into account. For additional informationabout the differences between the FAT and NTFS file systems, as well as the advantages and disadvantages of each, click the following article number to view the article in the Microsoft Knowledge Base: 100108 (http://support.microsoft.com/kb/100108/) Overview of FAT, HPFS, and NTFS file systemsNOTE: Windows NT 4.0 no longer supports the HPFS file system.The Convert.exe utility is supplied with Windows to convert a FAT partition into an NTFS partition. Use of Convert.exe is straight forward, but there are considerations that should be taken into account before using the utility.The following limitations should be recognized before converting a FAT partition to NTFS: • The conversion is a one-way process. After a partition has been converted to NTFS, it is not possible to convert the partition back to a FAT partition. To restore the partition as a FAT partition, the partition would have to be reformatted as FAT (which would erase all data from the partition) and then data can be restored from backup. • The system partition of a RISC-based computer cannot be changed to NTFS. The ARC specification requires that the system partition be FAT. It is possible to create a small (1 MB) FAT partition for the system partition and install Windows on an NTFS partition (the boot partition). • Convert.exe requires a certain amount of free space be present on the drive in order to convert the file system. For additional information about the amount of free space required for a conversion, click the following article number to view the article in the Microsoft Knowledge Base: 156560 (http://support.microsoft.com/kb/156560/) Free space required to convert FAT to NTFSNOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).To convert a FAT partition to NTFS, perform the following steps.1. Click Start, click Programs, and then click Command Prompt. 2. At the command prompt, type CONVERT [driveletter]: /FS:NTFS. 3. Convert.exe will attempt to convert the partition to NTFS.CONVERT may present the following error: Convert cannot gain exclusive access to the [driveletter]:, so it cannot convert it now. Would you like to schedule it to be converted the next time the system restarts (Y/N)? This error will occur if any of the following three conditions exist: • If you run the CONVERT command while the current directory is on the drive that is to be converted (for example, you type CONVERT F: /FS:NTFS at the F:\> prompt). To solve this, either answer "Yes" to the prompt and restart the system, or change to a directory on another drive and retype the command. • If an application has a file open on the drive that is to be converted. To solve this, either answer "Yes" to the prompt and the drive will be converted the next time the computer is restarted, or close any applications that may be using files on the drive to be converted. Remember that this also applies to users accessing files on the drive over the network. This also includes a page file that resides on the drive. • If you attempt to convert the partition from which the operating system is running. It is not possible to convert the boot partition while the operating system is running. To convert the boot partition, it will always be necessary to issue the CONVERT command, answer Yes to the prompt, and then restart the computer. The partition will be converted the next time the computer is restarted. As an alternative, it is possible to boot the computer to an installation of Windows on a different partition and convert the partition from that installation of Windows. Note Default NTFS Permissions are not applied to a converted boot partition.For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 237399 (http://support.microsoft.com/kb/237399/) The default NTFS permissions are not applied to a converted boot partition Windows supports two disk file systems: the FAT file system and the NTFS file system. This article explains how to convert a FAT partition into an NTFS partition, and the considerations to take into account. For additional informationabout the differences between the FAT and NTFS file systems, as well as the advantages and disadvantages of each, click the following article number to view the article in the Microsoft Knowledge Base: 100108 (http://support.microsoft.com/kb/100108/) Overview of FAT, HPFS, and NTFS file systemsNOTE: Windows NT 4.0 no longer supports the HPFS file system.The Convert.exe utility is supplied with Windows to convert a FAT partition into an NTFS partition. Use of Convert.exe is straight forward, but there are considerations that should be taken into account before using the utility.The following limitations should be recognized before converting a FAT partition to NTFS: • The conversion is a one-way process. After a partition has been converted to NTFS, it is not possible to convert the partition back to a FAT partition. To restore the partition as a FAT partition, the partition would have to be reformatted as FAT (which would erase all data from the partition) and then data can be restored from backup. • The system partition of a RISC-based computer cannot be changed to NTFS. The ARC specification requires that the system partition be FAT. It is possible to create a small (1 MB) FAT partition for the system partition and install Windows on an NTFS partition (the boot partition). • Convert.exe requires a certain amount of free space be present on the drive in order to convert the file system. For additional information about the amount of free space required for a conversion, click the following article number to view the article in the Microsoft Knowledge Base: 156560 (http://support.microsoft.com/kb/156560/) Free space required to convert FAT to NTFSNOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).To convert a FAT partition to NTFS, perform the following steps.1. Click Start, click Programs, and then click Command Prompt. 2. At the command prompt, type CONVERT [driveletter]: /FS:NTFS. 3. Convert.exe will attempt to convert the partition to NTFS.CONVERT may present the following error: Convert cannot gain exclusive access to the [driveletter]:, so it cannot convert it now. Would you like to schedule it to be converted the next time the system restarts (Y/N)? This error will occur if any of the following three conditions exist: • If you run the CONVERT command while the current directory is on the drive that is to be converted (for example, you type CONVERT F: /FS:NTFS at the F:\> prompt). To solve this, either answer "Yes" to the prompt and restart the system, or change to a directory on another drive and retype the command. • If an application has a file open on the drive that is to be converted. To solve this, either answer "Yes" to the prompt and the drive will be converted the next time the computer is restarted, or close any applications that may be using files on the drive to be converted. Remember that this also applies to users accessing files on the drive over the network. This also includes a page file that resides on the drive. • If you attempt to convert the partition from which the operating system is running. It is not possible to convert the boot partition while the operating system is running. To convert the boot partition, it will always be necessary to issue the CONVERT command, answer Yes to the prompt, and then restart the computer. The partition will be converted the next time the computer is restarted. As an alternative, it is possible to boot the computer to an installation of Windows on a different partition and convert the partition from that installation of Windows. Note Default NTFS Permissions are not applied to a converted boot partition.For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 237399 (http://support.microsoft.com/kb/237399/) The default NTFS permissions are not applied to a converted boot partition
