a time watch in seconds
You use a tape measure, or similar.
Direct measurement is when an object or something can be directly measured, meaning that you can actually pick it up and measure the sides (such as a box) Something that wouldn't be classified to be directly measured is something like a rock, where you need to use Indirect measurement to measure it, like dropping a rock in a container with water, and see how much the water rises. See related link below for more information
You would use the water displacement method. Place an overflow can in a container that can catch the water that flows out of the can. Fill the can completely full of water. Place the figure in the can, and collect the water that flows out of the can. Measure the water that overflowed with a graduated cylinder, and that will give you the volume of the figure in mL. Since 1mL exactly equals 1cm3, you can also know the volume of the figure in cm3.
whats the answer?
typically, acresMy VersionI measure a lake in surface area, Square Miles in my case, and Ice thickness for safety. As you can see my measurement is for my uses.You may measure the amount of water, the depth of the water, The cleanliness of the water, the height of the lake above sea level or dozens of other ways depending on what you need to know.
Yes, it is, as all the water that enters it, quickly flows out.
Flow is a verb and a noun. Verb: Water flows from the faucet. Noun: The steady flow of water from the fountain is relaxing.
1) Measure the height of water in a beaker or a bowl. (First Measurement) 2) Place the object in the water. 3) Measure the height of the water while the object is still in the water. (Second Measurement) 4) Subtract your first measurement from your second measurement.
The measurement of salt in water is called the salinity.
Water from a faucet is water from your city water system.
Flow is measured by volume per time. To make measurement you will need a stop watch and a container that has a volume measurement such as a gallon jug or five gallon bucket. Start filling container and start timer simultaneously, then after three minutes turn off faucet. Measure amount of water in container either by the volume on the conainer itself or use another container to measure in increments such as a quart jar or a 2-litre. Once you have determined your volume divide it by your time which would be three minutes. If you used gallons your result would be gallons per minute or gpm. If you used litres it would be litres per minute.
The faucet itself does not use any water. The rate at which the water leaves the faucet is dependent on the make of the faucet.
you did not pay bill
I wiil use water
You use volume measurement to measure water and other liquids such as cooking or pouring a cup of water. You measure the house temperature with a thermometer. You measure weight (or mass) with a scale to weigh yourself or your food. You measure velocity (and acceleration) while driving. You measure distance, length or size with a ruler, or a meter stick or any other measurement tool.
Static pressure can be caalculated by simply measuring the height of the faucet from the highest fixture above this faucet and times the height by .434 for static pressure
water in millagrams