In a spanning tree topology, the switch with the lowest Bridge ID becomes the central point of reference, or the root bridge. The Bridge ID is determined by a combination of the switch's priority value and its MAC address. If multiple switches have the same priority, the switch with the lowest MAC address is chosen as the root bridge. This selection process helps ensure a loop-free network topology.
Spanning Tree Election CriteriaSpanning Tree builds paths out from a central point along the fastest available links. It selects path according to the following criteria:1. Lowest root bridge ID (BID)2. Lowest path cost to the root3. Lowest sender bridge ID4. Lowest sender port ID (PID)Therefore, the answer to your question is Lower Bridge ID
Star topology is characterized by a central hub or switch to which all nodes (devices) are directly connected, creating a hub-and-spoke configuration. This setup allows for easy addition or removal of devices without disrupting the network, as each node is independently connected. If one connection fails, it does not affect the entire network, enhancing reliability. However, the central hub represents a single point of failure, meaning that if it fails, the entire network becomes inoperative.
it becomes a Star polygon
First of all, if the rotation is 180 degrees then there is no difference clockwise and anti-clockwise so the inclusion of clockwise in the question is redundant. In terms of the coordinate plane, the signs of all coordinates are switched: from + to - and from - to +. So (2, 3) becomes (-2, -3), (-2, 3) becomes (2, -3), (2, -3) becomes (-2, 3) and (-2, -3) becomes (2, 3).
Generally none. But it can have four when it becomes a square.
lowest bridge ID
Spanning Tree Election CriteriaSpanning Tree builds paths out from a central point along the fastest available links. It selects path according to the following criteria:1. Lowest root bridge ID (BID)2. Lowest path cost to the root3. Lowest sender bridge ID4. Lowest sender port ID (PID)Therefore, the answer to your question is Lower Bridge ID
mass
The physical network topology that has the inherent weakness of a single point of failure is the star topology. In a star topology, all devices are connected to a central hub or switch. If this central device fails, the entire network becomes inoperable, as all communication relies on it. This makes the network vulnerable to disruptions if the hub experiences any issues.
Where it is produced
The mass of the host star.
The topology you're describing is known as a star topology. In a star topology, all network devices are connected to a central hub or switch, which acts as the main point of communication. If this central point fails, the entire network becomes inoperable, as no devices can communicate with each other. This design is often used for its simplicity and ease of troubleshooting, but it does create a single point of failure.
The type of government determines how a government becomes centrally planned.
If the president passes away, resigns, or is impeached.
its original mass when it formed
The helper T cell count becomes very low
The helper T cell count becomes very low