Want this question answered?
The width of a pencil would be the metric unit of centimeters
That is correct. Volume is height x length x width.
Measure the mass of the pebble first (this should be easy) Then you find out the volume of the pebble by trying to measure the height, length, and width of it. Try to find a regular pebble as it will help with your result! Then you divide your mass by your volume.
depends on the width and each width can have up to 3 distinct weights?
that's a very vauge question. width would be the diamater when it is standing upright.
No they aren't. They both run on different tracks because of this :-)
Gauge by: Andrea Burke
If the tracks are not parallel, the wheels will not stay on the tracks; train wheels are spaced at a fixed width, or gauge, and that width cannot expand or contract to accommodate non-parallel tracks. Thus, if the tracks were non-parallel, the wheel would come off the track and cause a derailment.
Horse and carriage width. It was used as a tradition. Train/Trolley tracks were even made at the width of the wheels of a carriage.
Track width is a measurement of the distance between the inner edges of a pair of railway tracks. This measurement is important for determining the load-bearing capacity of the tracks as well as the types and sizes of trains that can use the tracks. The width of the tracks is also important for the maneuverability of the trains as the width of the track will determine the amount of space available in the curves of the track and the degree of curvature that can be achieved. There are several different ways to measure track width including: Standard Gauge (SG) - This is the most common track width in the world and is measured as 4 feet 8.5 inches. Broad Gauge (BG) - This is a wider track width and is measured as 5 feet 6 inches. Narrow Gauge (NG) - This is a narrower track width and is measured as any width below 4 feet 8.5 inches. Mixed Gauge (MG) - This is a combination of both Standard and Broad Gauge tracks on the same line. The track width is also important for the layout and design of the railway as the width of the track will determine the amount of space available for the construction of the railway as well as the amount of space available for the installation of signals switches and other track infrastructure.
It is called a gauge. The North American railroad system's gauge is 4 ft. 8 1/2 in. in width. It is the width of a Roman chariot.
If you are talking about the rectangle, just multiply length x width. The result in this case will be in square meters.If you are talking about the rectangle, just multiply length x width. The result in this case will be in square meters.If you are talking about the rectangle, just multiply length x width. The result in this case will be in square meters.If you are talking about the rectangle, just multiply length x width. The result in this case will be in square meters.
100 meters (the total track is 400 meters around) for outdoor highschool tracks
The distance between the inner edges of the heads of the rails is called the gauge.
The Gauge. In America we use standard gauge - 4 ft 8,1/2 inches.
Multiply the width and length, and then multiply that result with the height.
Increase the number of wheels and/or increase the tread width of the tires or tracks, so that their weight is distributed over a larger area.