Circumference (perimeter) = pi * diameter = 3.141592654 * 21 = 65.973 feet
Surface area = pi * radius 2 = 3.141592654 * 10.5 * 10.5 = 346.36 sq. feet
Volume (cu feet) = 346.36 * depth in feet
.
Volume * 7.4805 = US gallons
Volume * 6.2288 = imp gallons
(results approximate)
Diameter- A line going straight from side to side of a circle, equals the total distance across the circle. Radius- Half of the total diameter. For example, if the diameter is 8, the radius is 4.
Pi is endless. Nobody can determine where the end is.
No.Circumference is the total distance around a plane figure. Usually a circle or ellipse.Diameter is the distance of a straight line from edge to edge passing through the centre of a circle.
It depends on the length of the arc because there are a total of 360 degrees in a complete circle.
Assuming the circle is tangent to the sides of the square, then the edges of the circle meet the square at the midpoint on each of the four sides. So the diameter of the circle is the same as the length of a side of the square. So all you need to do is find the length from the total area by taking the square root of the area (since A = s2), which gives you the diameter, then halve it to get the radius.
It is twice the size of a circle's radius.
Diameter- A line going straight from side to side of a circle, equals the total distance across the circle. Radius- Half of the total diameter. For example, if the diameter is 8, the radius is 4.
The formula for the area of a circle is pi (3.141265...) times the radius squared. Since half of the diameter is the radius, plug that number into the formula to get the total square feet.
Better known as Bolt Circle Diameter, the formula is d / sin (1/n x 180) where d is the distance between the centers of two adjacent bolts and n is the total number of bolts.
The diameter of a circle is from one point-to the other (a straight line) in a circle(<---->), So in 1 yard being the total distance in length <----1yard--->, the diameter is 1 yard.
It depended on how much is the diameter in total then you divide it by pi. Pi means-3.14 that is how you get the radios
Pi is endless. Nobody can determine where the end is.
30 * pi ≈ 94
In a circle, 360 degrees are the total number of degrees.
The formula for the area of a circle is: A=∏r2Where A is the total area of the circle and r is its radiusThe diameter is twice the radius, so the radius in this case would be 17 feet.A=∏*(17)2A=∏*289A=289∏A equals about 907.46 feet
The total surface area of the Earth is 5.1 × 108 km2. so 4(pi)r2 =surface area of a circle. solve for (r). r = 6372.2 km diameter = 2r =12744.4 km
No.Circumference is the total distance around a plane figure. Usually a circle or ellipse.Diameter is the distance of a straight line from edge to edge passing through the centre of a circle.