16'. Diameter is the measure from the edge of a circle through the middle to the opposite end.
At the girdle, this stone would measure about 6.5 mm.
I would round it to 900,000,000
It depends on where you want to round to. If you want to round to hundreds it would be 149,600. If you want to round it to thousands it would be 150,000.
The answer will depend on what aspect you wish to measure: its length, thickness, its mass or some other aspect.
You would round -1.07 to -1.1 You would round -1.07 to -1.1
because that the sun is at one and the moon the other the would turns round so that we can have sun and moon
At the girdle, this stone would measure about 6.5 mm.
Yes. You would round it up or down as with any other number.
An engine isn't round, so it would be very difficult to measure the circumference.
24 foot round pool would be 24 feet across from the middle of the pool basically measure the diameter of the pool.
It's the length around a round object, like if you would run a tape measure around barrel or a ball.
You measure them the same way you would for any other blanket. Using a flexible tape meassurer, start at the center of the horses chest and meassure all the way to the middle of the horses tail, if it's and odd number round up to the next biggest number.
There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6There is a function called ROUND, which enables you to round values to a specified amount of digits:=ROUND(2302.5543,2) would give 2302.55There are two other functions called ROUNDDOWN and ROUNDUP that can be used to round figures down or up with a set amount of decimal places.=ROUNDDOWN(2302.57,1) would give 2302.5=ROUNDUP(2302.52,1) would give 2302.6
I would round it to 900,000,000
depends on the gun but i would remove the magazine if there is one, open the chamber, if you look in you should be able to see the end of the round, then you should be able to maneuver your finger nail under the rim of the round then pull it out. Other then that firing the round would be the easiest way.
tape measurement is very necessary,it helps for making furniture,constructing roads and buildings, measuring people, and around things that bend or are round.
The same way you measure the volume of any other box, or any other rectangular prism: -- Measure the length. -- Measure the width. -- Measure teh height. -- Multiply (length) x (width) x (height). The product is the volume of the box.