Probably not. The 94' models were more box shaped and newer models are rounder.
If you strip the entire front end off, the units should be swappable. The only thing that Im not sure of is how the fenders will line up with the A-piller, and your door. I also seem to recall something about the height of the radiator mount in the subframe, I think the mount sits lower in the SC2's then the older SL1's. this may cause a problem with the hood latch if the upper radiator supports are different.
The front fascias will interchange. The rear ends won't.
Parts from a Chevy truck will not interchange with a Ford trucks parts.
yes it will camaro parts from 82-92 will interchange
more than likely any corvair of that body style the parts will interchange.
a lot of them will interchange, depends on wht parts you are talking about though
Will parts off 1985 mustang interchange with 1989 gt mustang?
Doubtful however, contact any autoparts store where you can buy parts and ask them to pull up your 97 than pull up a 92 and see if they are the same. Should be able to answer your question in a few minutes.
Drive to your local parts store or GM dealer and they can tell you what it is.
No exterior parts will interchange because of a difference in generation that began in 95, very few interior parts may but not many. Mechanically quite a few parts will work together. The engine, transmission, axel parts, exhaust, etc will interchange.
Other than perhaps the front subframe assembly from the 1967-69 models, very little
Almost all parts will interchange as they have the same chassis and series of motor.