answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: When working from an a frame ladder you should never lean out?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Math & Arithmetic

How many rungs are on a 7 foot ladder?

The spacing on ladder rungs should never be less than six inches or greater than 12 inches. The majority of 7 foot ladders have between 6 and 10 rungs.


When did Albert Einstein retire?

Never. He stayed working until the day he died.


A 12-foot extension ladder is placed against a wall To achieve the proper climbing angle approximately how far should the bottom of the ladder be from the base of the wall?

I've heard it said that the vertical should be 4 times the size of the base (of the right angle triangle). Therefore if a 12 foot ladder would reach about an 11 foot vertical, it would be placed just under 3 feet from the wall.I've also seen it said that the angle should be 75.5 degrees.Personally I do not agree with an absolute. At heights under 10 feet, your center of gravity (especially if you are a very large person) might cause the ladder to move away from the wall while you are climbing, therefore a more shallow angle may be appropriate.At heights over 20 feet, I like to ensure good pressure against the wall when I am at the top. This feels more secure on a windy day. A more shallow angle can help, but ONLY if the base of the ladder is braced. For instance I've braced the bottom against a big tree, or a long plank that spans between the two wheels of a car.At heights over 25 feet especially you've just got to rule out all variables because it only takes one fall in a thousand trips up a ladder to end your fun (income, health, life). Stand back and look at your angles, test how the ladder feels as you go up, adjust as many times as you have to, brace the bottom, tie off the top, never compromise.


How many Pairs of shoes does rapper wale have?

about 1,000 to 2 thousand going,but he said for a fact that he collect them but never frame them.#sneakerhead big time


What is the history of statistics in the Philippines according to Cristobal M. Pagoso?

you should never ask this questions because you'll never get the right answer

Related questions

How many rungs are on a 7 foot ladder?

The spacing on ladder rungs should never be less than six inches or greater than 12 inches. The majority of 7 foot ladders have between 6 and 10 rungs.


Who's won the most ladder matches ever?

Jeff Hardy with a record of 10 wins..................................funny is in it. jeffs speacialty matchy is TLC yet hes never won one and has lost the most of them meanwhile hes won the most ladder matches.....................maybe he should change his speacilty match to a ladder match.


Should you use past tense after never or present?

First of all, the question should be: "Should you use the past or present tense after 'never'?"The answer is: you can use any tense after 'never'. It depends on what time frame to which you are referring.


What movie is this tagline from A bond forged by fire is never broken?

Ladder 49


Was Janet Frame married or not?

no she never did get married.


How do you avoid floating neutral?

The neutral of a generator should never get into a condition where is is floating. All generators have the neutral tied to the frame of the generator set. It comes this way from the manufacturer. If it is floating then someone has disconnected the neutral wire from the frame. Just reconnect the neutral to the generator frame again to stop it from floating. Larger generators should also have a ground rod connected to the generator frame for grounding purposes.


Did a camera man knock down a ladder during Christians Entrance?

no that has never happend


How does a novice start to fix his wrecked car?

Start by evaluating the frame. If the frame is bent...foreget it. It will never be the same.


How do you use an aluminum extension ladder?

Before use, perform a thorough inspection and look for damage, bent rungs, grease on tread, defective feet, etc. Follow the labels on the ladder and the owner's manual. If you don't have the manual you can download a copy from the manufacturer's website. When you set the ladder, keep clear of electrical lines, Lean the ladder against the structure at a 4:1 (with your toes at the base of the ladder, your fingertips should touch the ladder with your arms extended). Check that the surface is firm and level. If the ground is soft, you can lay down a plywood square so the ladder won't sink. Check that the ladder won't kick out. If you are on hard pavement, ensure that the feet have the rubber tread down. Some ladders have "claws" on the feet that can be flipped to bite into the dirt. Extend the ladder so that it is between 3 and 4 feet above the top of the structure if you need to step off the ladder onto a roof. Secure the top of the ladder to the structure with a rope, strap or chain so the top won't slide. Maintain 3 points of contact while you climb. Always climb facing the ladder. Don't overload the ladder. Add your weight and what you are carrying up the ladder. Never put 2 people on the ladder at the same time.


Are there beds that do not require the use of a metal bed frame?

Yes, you are never required to use a frame except for water beds.


Did George Washington frame the constitution?

yes Washington helped frame the constitution


How do you get DeSmuME to stop lagging?

To get DeSmuME to stop lagging, go to Configuration, then Frameskip. Set the frameskip to 9, and limit the frame rate. That should get DeSmuME to a speed where it almost never lags, and never goes too fast.