A Hanes or chilton manual
Stick the starter in the cutlass supreme.
cutlass supremes are so baller
go to the parts store and get a rear view mirror mounting kit and follow the instructions to a T.
It takes a special gauge to install the crank sensor. It can be rented from some parts stores.
Remove the wiring harness from the back of your 1995 Oldsmobile Cutlass blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install your new blower motor.
Remove the oil pan, unbolt the pump, install the new pump,the pump drive is off the bottom of the distributor and must be aligned to go in properly.
there is not a specific torque for the idler pully. tighten it up with a ratchet and it will not loosen up
Spray lubricant on hex fitting of antenna(mounted on fender) Unscrew fitting.Follow antenna cable back thru fender wall.Unplug where it mates with same size cable. Reverse for new install
There are many websites and resources that offer instructions on how to setup and install PVP software. The best website to get instructions on installation is the PVP website.
Seems silly.. take out the old one, and install the new one. Pull the carpet away from you in the trunk by your brake lights, and you'll see 3 screws with plastic wingbolt lookin things. Unscrew all of them, and you can pull the entire assembly out.
Insert the install disk, click install and follow the instructions. OR Download the program, save it somewhere you can find it, click the .exe file and follow the instructions.
I need to install rain gutters on my house. Do you know where i can find step by step instructions on how to install rain gutters?