If the porch light switch is the only outside item controlled y the switch bank inside the house, the porch light switch should be located the furthest from the door frame adjacent to which the switch bank is sited. The switch closest to the door should control the lighting in the room immediately adjacent to the door. In this manner, when entering the room from the outside in the dark, you merely toggle the nearest switch to the door frame to light the room - you don't have to reach around or over other switches. Switches controlling other internal lights should be sited in between. So, for a 2-gang arrangement, the switch located closest to the door frame controls the interior light and the other switch controls the porch light. For a three-gang arrangement, the middle switch would control another interior light.
The only complication is that is if there are switches in the switch bank that control other exterior circuits, the porch light would be inboard of these and would not be the last outboard switch in the array. So, for a three-gang array in which two exterior lights are switched, the porch light switch would be the middle switch and the other exterior lights (sports, floods, landscape lighting, etc.) would be controlled by switches placed further from the door frame.
No reason at all. They could just as easily be in any other configuration.
A door is a common object that fits this description. When a door is closed, it appears as a solid barrier on the outside but allows entry to the inside. When the door is open, the inside becomes visible from the outside, blurring the distinction between the two spaces.
That is the correct spelling for inside and outside. Inside a structure is the interior and the outside is the exterior.
The reason is that the cylindrical configuration turns out more resistant to the inside pressure than the rectangular one. The opposite is also true, the cylindrical configuration withstands a higher outside pressure. That why submarines use such configuration.
Outside The Inside was created in 2005.
The perimeter is both on the outside and the inside of a shape, as it is basically the outside wall/border of a shape and can therefore be viewed from the outside or the inside.
The perimeter is both on the outside and the inside of a shape, as it is basically the outside wall/border of a shape and can therefore be viewed from the outside or the inside.
Outside Inside was created in 1983-03.
yes by putting one leg inside and the over outside
outside
outside
corn