In the hot tub junction control box there should be three terminals. The terminal block might say line voltage. This is where the incoming "hot" wires connect. The red and black wires will probably be for the 240 volt pump motor and one of the two "hot" wires and the white wire will be used for the controls that control the pump.
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
white wire = neutral bare wire = ground black wire = line voltage red wire = returned from a switch, or the other phase of line voltage in order to supply 240VAC
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Red, white, and black are standard for a three-way switch (you have two switches that control the same fixture). You should also have a ground wire (copper, unsheathed). The black and red are negative, while the white is positive. It works pretty simply. When the switch is up, the black and white are linked, creating a circuit. When it is down, the red and white are linked. If both switches agree (both are red/white or both are black/white), then the circuit is completed and power flows.
red wire connected to live conductor of supply intake,while the white wire connected to neutral conductor or supply and the bare wire connected to the protective earthing of
you dont
the thermostat has a black(line) wire to it, and a red wire going to it. the red wire then connects to the neutral wire. the black and red are like a leg switch.
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
white wire = neutral bare wire = ground black wire = line voltage red wire = returned from a switch, or the other phase of line voltage in order to supply 240VAC
If this is a home wiring question and the wires are black and white then black is Hot and white is Neutral. If you also have a red wire, it is the other hot wire, and either the black or the red wire to the white one would be 120 volts, and red to black would be 240 volts.
The ignition wire in a Nissan 350z is black and red. The starter wire is white/red and the second starter wire is white/green.
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Red, white, and black are standard for a three-way switch (you have two switches that control the same fixture). You should also have a ground wire (copper, unsheathed). The black and red are negative, while the white is positive. It works pretty simply. When the switch is up, the black and white are linked, creating a circuit. When it is down, the red and white are linked. If both switches agree (both are red/white or both are black/white), then the circuit is completed and power flows.
Black Wire from photocel to hot wire(black) coming in red wire to light fixtures black wire. White wire to neutral wires all light and power source white.
In residential wiring the white wire is neutral on the 120 volt circuits. On a 3way circuit the red is the traveler and the white is neutral. On a 240 volt 3 wire connection the white & black are hot. On a 240 volt 4 wire connection the black and red are hot and the white is neutral.
the black wire is A phase, the red wire is B phase, and the white wire is the neutral. Black should have around 120 volts. Red should have 120 volts, and should add up to 240 volts with a multi meter.
red wire connected to live conductor of supply intake,while the white wire connected to neutral conductor or supply and the bare wire connected to the protective earthing of