The name 'sprocket' applies generally to any wheel upon which are radial projections that engage a chain passing over it. It is distinguished from a gear in that sprockets are never meshed together directly, and differs from a pulley in that sprockets have teeth and pulleys are smooth.
A sprocket can be used for many things, depending on what you need it to do.
Sprockets is most commonly used for tracked vehicles.
A chain and sprocket is used for the transfer of rotational energy from one place to another. Usually for the purpose of motorized transport in various types of motorcycles.
a large sprocket
It depends on whether you are talking about the front sprocket (the one at the pedals, called a chainring) or the sprocket at the rear derailleur. The lowest gear at the front is the smallest sprocket/chainring. The lowest gear at the rear is the largest sprocket. So if you combine the smallest sprocket at the front with the largest sprocket in the rear you have the lowest gear available on your bike.
To replace a bike sprocket, you will need to first remove the chain from the sprocket. Then, use a wrench to loosen the bolts holding the sprocket in place. Once the bolts are removed, take off the old sprocket and replace it with the new one. Secure the new sprocket in place by tightening the bolts. Finally, reattach the chain to the new sprocket.
Sprocket and chain and what?
depends if the sprocket is bigger or smaller than a stock sprocket.
Sprockets are a kind of wheels that have teeth to keep a chain in place an moving from the action made by another sprocket. Sprocket wheels are used for bikes and on roller chains.
To remove a sprocket using a sprocket removal tool, first, place the tool over the sprocket and ensure it is securely in place. Then, use a wrench to turn the tool in a counterclockwise direction to loosen and remove the sprocket. Be sure to follow the manufacturer's instructions for the specific tool you are using to avoid damaging the sprocket or tool.
They're used for power transfer and to create gearing ratios.
first. take the left side rear wheel off. then remove the 4 bolts that hold the sprocket to the sprocket holder. then remove sprocket
A sprocket is a lever.
The sprocket on the nose of the crankshaft that drives the cam sprocket.