0
4.6 centimeters
What else can I help you with?
Where On a ruler where would five eights of an inch be?
Five eighths of an inch on a ruler would be located between the half-inch mark and the three-quarter inch mark.
What does 10.75 look like on a ruler?
On a standard ruler, 10.75 would fall between the 10-inch mark and the 11-inch mark. To be more precise, each inch on a ruler is typically divided into 16 equal parts, so 0.75 inches would be three-quarters of the way between the 10-inch mark and the 11-inch mark. In other words, 10.75 would be three-quarters of the way from the 10-inch mark towards the 11-inch mark on a ruler.
How much is 0.83 on a ruler?
0.83 on a ruler would typically be between the 3/4 inch mark and the 7/8 inch mark.
What does 0.66 equal to on a ruler?
0.66 on a ruler represents 0.66 inches or 66 hundredths of an inch. It would fall between the 5/8 inch mark and the 11/16 inch mark on a standard ruler.
Where on a ruler is 1.125 inches?
To find 1.125 inches on a ruler, first locate the 1-inch mark. From there, move an additional 0.125 inches, which is equivalent to 1/8 of an inch. This will place you at the first small mark after the 1-inch mark, which is typically the third mark on the ruler after the 1-inch line. Therefore, 1.125 inches is just past the 1-inch mark, at the first eighth mark.
What does .375 inch look like on a ruler?
On a ruler, .375 inches is equivalent to 3/8 of an inch. It is located between the 1/4 inch mark (0.25 inches) and the 1/2 inch mark (0.5 inches). Specifically, it is three tick marks past the 1/4 inch mark. If using a standard ruler, you'll find it slightly closer to the 1/2 inch mark than to the 1/4 inch mark.
Where is 2.4 inches on ruler?
On a standard ruler, 2.4 inches would fall between the 2-inch mark and the 3-inch mark. Each inch on a ruler is divided into 16 equal parts, so you would count 4/10 of the way between the 2-inch mark and the 3-inch mark to locate 2.4 inches. It would be closer to the 2-inch mark but not quite halfway between the two marks.
where is 1.18 inches on a ruler?
1.18 inches on a ruler would be located between the 1 inch and 2 inch markings on the ruler. It would be slightly closer to the 1 inch mark than the 2 inch mark. Keep in mind that most rulers are divided into 16 equal parts per inch, with each tick mark representing 1/16 of an inch. So, on a standard ruler, the 1.18 inches mark would be located slightly beyond the 18/16 (1.125) mark and slightly before the 19/16 (1.1875) mark.
Where is 1.93 inches on ruler?
To find 1.93 inches on a ruler, first locate the 1-inch mark and then the 2-inch mark. Since 1.93 inches is just under 2 inches, you should measure 0.93 inches past the 1-inch mark. This is slightly less than a full inch, so it will be just short of the 2-inch mark, positioned between the 1.9 and 2-inch marks on the ruler.
Where is 7.2 on a inch ruler?
On an inch ruler, 7.2 inches is located just slightly past the 7-inch mark. It is a little less than a quarter of the way to the 8-inch mark. To be precise, it is two-tenths of an inch past 7 inches.
What is 68.88 inches on a ruler?
68.88 inches on a ruler would typically fall between the 68-inch mark and the 69-inch mark. In most rulers, each inch is divided into 16 increments, so 0.88 inches would be approximately 7/8 of an inch. This would be just short of the 69-inch mark, closer to the 68-inch mark.
How do Iread 4.875 inche on ruler?
To read 4.875 inches on a ruler, first locate the 4-inch mark. Then, move to the next mark, which is the 5-inch mark, and divide the space between these two marks into tenths. Count 7/8 of the way from the 4-inch mark, which is 0.875 inches, placing you at the 4.875-inch mark.
