Want this question answered?
If you are talking about a commercial measuring tape used for DIY projects or sewing then it would be millimeters or inches (some are calibrated down to 1/8th of an inch), depending on what unit of measurement you are using.The smallest division on most tapes is 1/32 of an inch ( smaller than a millimetre)The smallest division on most tapes is 1/32 of an inch
1 3/8th = 11/8th - 4/8th = 7/8th
1/8th = 0.125 so 3/8th = 0.375 which is 37.5%
38 (three to the 8th. power) is the same as 3x3x3x3x3x3x3x3.
3/8th mile = 3 furlongs = 660yds = 1980 ft = 23760in.
If you are talking about a commercial measuring tape used for DIY projects or sewing then it would be millimeters or inches (some are calibrated down to 1/8th of an inch), depending on what unit of measurement you are using.The smallest division on most tapes is 1/32 of an inch ( smaller than a millimetre)The smallest division on most tapes is 1/32 of an inch
1/16th of a pound or 1/8th of a cup depending on what you are measuring.
It is three quarters of the way from the 3 inch mark towards the 4 inch mark. Imperial rulers are normally marked in 16th of an inch with the 4th and 12th marks slightly longer and the 8th even longer. The 4th mark is ¼, the 8th mark is ½ and the 12th mark is ¾; 3.75 inches is 3¾ inches so on such a ruler it is the 12th mark to the right of the 3, and will be slightly longer than the 3 marks either side of it.
1/16th of a pound or 1/8th of a cup depending on what you are measuring.
The question mark was not invented by one specific person. It evolved over time as a punctuation symbol to indicate the end of a question in written language. Its precise origin is not definitively known, but it has been used in some form since ancient times.
1 3/8th = 11/8th - 4/8th = 7/8th
1/8th = 0.125 so 3/8th = 0.375 which is 37.5%
December 8th
7/8th
Seven and 1/8th yards
lachlan mark vella was bornDerrick Allen Schmidt was born
On November 8th 2011