Length (cubed) and time.
Current is rate of flow of charge, so 1 ampere = 1 coulomb per second. As ampere and seconds are both fundamental units (and coulomb is derived), a coulomb has the dimensions [current][time] i.e. As
the ratio of the distillate mass flow rate to the mass flow rate of the steam used
A Flow Transducer is also known as a flow senser. A flow senser is used to sense the flow rate a fluid flows or flow logger to record the flow of the fluids that run through them.
As per naffco, the flow rate for the landing valve is maximised to 10.0 lps at the pressure of 4.7 kgf/cm...thanks
Current is the flow of electric charge or the rate of the flow of an electric charge through a conductor.
Current is rate of flow of charge, so 1 ampere = 1 coulomb per second. As ampere and seconds are both fundamental units (and coulomb is derived), a coulomb has the dimensions [current][time] i.e. As
ML
these type of quantities are called derived quantities. Their value depends on some fundamental quantities or some other derived quantities. eg. force is a derived quantity whose value depends on mass(fundamental) and acceleration(derived).
This question cannot be answered sensibly. A cubic metre per second is a measure of volume flow rate, with dimensions [L3T-1]. A foot per second is a measure of linear flow rate, with dimensions [L1T-1]. Basic dimensional analysis teaches that in most cases you cannot convert between measures with different dimensions without additional information.
As the rate of flow decreases, the rate of deposition increases
Rate of flow is dependent on the restriction point, but other qualities of fluid flow, such as turbulence, will be affected by other dimensions of the pipe.
Viscosity is the term.
The relationship between radius and fluid flow rate is inversely proportional. As radius goes down, fluid flow rate goes up. The highest fluid flow rate will be at the lowest radius.
Viscosity is a substances resistance to flow. So as the viscosity of a substance increases, the flow rate will decrease.
Flow rate= radius to the fourth power
High viscosity lead to a low flow rate and inverse.
The FRI, or Flow Rate Index is a rating system for the flow rate of solids. Air and air pressure measurement connections are part of the testing apparatus.