0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What problem do UPS'S information system solve?
There are several problems that need to be solved by the UPS information systems. One would be routing the delivery truck to shorten the route distance traveled for the packages that are on the truck.
What fraction is 3 ups of a quart?
Not sure about 3 ups, but 3 cups is 3/4 of a quart.
How many times do you do in 25 sec in sit-ups if you can do four sit-ups every 10 sec?
15
What is intercept processing by UPS?
The package is being held for future delivery
What does repitition mean?
repitition-meaning to do again sentence-she did a repitition of her sit ups
Two measurements are used to rate the capacity of a UPS?
ohms and watts
What two measurements are use to rate the capacity of ups?
VA and Watts
Is ups input or output device?
UPS is Uninterruptable Power Supply. It is neither input not output. It supplies electrical power to a computer when the main electrical supply is interrupted. It does not handle data in any way.
Are AC and DC kilowatt hours different for determining size of an UPS?
Kilowatt-hours is kilowatt-hours, regardless of AC or DC. However, UPS's are rated in kilowatts, not kilowatt-hours. If you are talking about battery capacity versus output power, its still different, but in that case you need to consider the efficiency of the UPS. You also need to consider run-time limitations on the UPS, if there happen to be any.
What is the amps of a 650 VA UPS?
To answer this question the voltage of the UPS has to be stated. Take that voltage and divide it into the 650 rating. The answer will be the output amperage of the UPS.
How can you calculate the capacity of the UPS you need for your home entertainment system?
The most easiest way is to get yourself a little device that measures the compsumption of power by the set. When you know what it uses, take that amount and add 10%-15% to it. That will be the capacity of the ups you will need. Keep in mind though that a ups is ment to provide power for a limited amount of time during a power failure.
Can ups be connected to a stabilizer?
1- connect stablizer first to power 2- connect ups to stablizer output 220 v but be sure output v = 220 v not more the answer is yes you can
What the use of computer UPS?
A computer UPS (Uninterruptible Power Supply) is designed to provide power to a computer system if normal power fails. The length of time a UPS will support a computer depends on the capacity of the UPS and the draw of the system being supported. Properly configured and installed, most systems will monitor the UPS and begin a normal shutdown when notified by the UPS that a power outage is in process. Some are large enough to maintain computer operations long enough for backup power generation to come online.
How do you calculate the load percentage of a three phase UPS?
output power/Rated power
What will be input and output current of 10 KVA 3 phase UPS?
It will depend on input & output voltage, if voltage is same current will remain same
How do you increase the storage capacity of the ups?
you send it to the pony express then shuv it in your nose
How much wattage output should a UPS have in the event of a total blackout?
Wattage is determined by multiplying amps by voltage: ergo, a 2.5 amp draw system in a standard 120v (US) home will require a minimum of 300watts, and any good tech will add 20-30% to that figure for a 'safety' cushion; in this case add 90watts for a total of 390watts output needs of the system. Don't forget in this case (total blackout), you need enough wattage to include the monitor along with the system itself. Oh, and do not keep any printers or similar devices on the UPS!
