0
CAT6a
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you check continuity of 300 meter long cable?
Method #1:Bring the ends together. Use ohm-meter to measure resistance between the ends.Compare with manufacturer's specification for the cable's resistance per 100-ftor 100-m.Method #2: Only possible if the cable has more than 1 conductor.At one end of the cable, connect two conductors together. At the other end, use anohm-meter to measure the resistance between the same two conductors. If the metershows open-circuit, then at least one of those conductors is broken in the cable.
What is the allowable propagation delay for a 100 meter Category 5 cable at 10 MHz?
200ns
What is the ampere capacity of 16 square mm cable?
64 amps in less than 100 meter long
If you change out a 60amp meter with a new 100amp meter would the wiring still be big enought to carry the 100amp?
No, on a service change all the wires have to be able to carry the current of the highest rated device. There are tow cables associated with your question. The one from the pole to the meter and the one from the meter to the main electric panel. The one to the meter is the responsibility of the power company and may well be large enough. Since it is in free air its current carrying capacity is not de-rated in the same way as the cable from the meter to your main panel. Since you will have to likely upgrade your main panel it is a good idea to replace the service entry cable to 100 A rating.
If you are in a business and the meter you paying for is also the owner meter how do you get your own meter?
Could be tricky. The business owner WILL need to give their written consent (since it's their building). However - you could contact the energy supplier and ask them for a separate meter. Assuming you rent a room(s) within the main building, the power company should be able to run a spur off the main supply cable for the building to provide your workspace with a separate meter.
Where does the supply authorities cable enter a building?
find your electric Meter and you've found the point of entry, or depending on where the electric meter is in the building, you can trace the cable back from the meter to the point of entry.
Coaxial cable is 500 meter it has a velocity factor 0.6 how long of the cable length does it take energy to travel the full length of the cable?
14
What is the actual loss of voltage in 100 meter length of cable?
It depends on the material of the cable (aluminum or copper) and the gauge of the cable. (Thickness). And on the current you intend it to carry.
Where can someone find out how to use a cable length meter?
You can find out how to use a cable length meter by reading the eHow article describing how. You may also find a short description of how to use it on the back of the packaging it came in.
What is the cable size for a 1500 kVA generator with cable length of 50 meters?
35 KVA generator using for load 100 meter length which cable need to used
How can you test a rj 45 cable?
A) Lan Cable Meter B) Multimeter C) Plug it into a PC or laptop and try to connect to the internet
Cable size for 25kw motor 100 meter length?
16 mm square
Where can someone buy a two meter HDMI cable?
A two meter HDMI cable can be purchased on websites such as Amazon, Currys, eBay, Hot UK Deals, Sears, and Ada Fruit. Argos, Monoprice, and Deals woot! also carry them.
What unit measure is to measure the length of a computer cable?
Not sure what cable exactly you mean, but the meter is quite appropriate to measure cables in general.
How do you check continuity of 300 meter long cable?
Method #1:Bring the ends together. Use ohm-meter to measure resistance between the ends.Compare with manufacturer's specification for the cable's resistance per 100-ftor 100-m.Method #2: Only possible if the cable has more than 1 conductor.At one end of the cable, connect two conductors together. At the other end, use anohm-meter to measure the resistance between the same two conductors. If the metershows open-circuit, then at least one of those conductors is broken in the cable.
Is the Cable Cat 6 available in 20 meters?
The Cable Cat 6 is an Ethernet cable that supports fast Ethernet 10G BASE-T. This cable is available in a 20 meter length online from various retailers including cabling4less.
A cable is 30 meters long. How long is the cable in decimeters?
1 meter = 10 decimetersSo, 30 meters = 30*10 = 300 decimeters
