answersLogoWhite

0

Which cylinder is which on a 1995 Chevy Cheyenne 4.3L V6?

Updated: 8/16/2019
User Avatar

Wiki User

16y ago

Best Answer

Looking at the engine from the front, the cylinders on your driver side are 1,3,5, front to back. passenger side goes 2,4,6, front to back

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Which cylinder is which on a 1995 Chevy Cheyenne 4.3L V6?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Does a Chevy 305 mount to the same transmission as a 43L?

Yes it will bolt right up to it.


Where can you check fuel pressure on a 1990 V6 43L Chevy Siverado?

The fuel lines around the filter; you will need an adapter.


How many kL are in 43L?

.043


How many liters in 43ml?

.43L. 1000ml=1L


Is there a thermostat 150 180 degree that will work in a Chevy S 10 V6 43L?

Don't know what year you have but some sensors are temperature sensitive and you should run a 195 degree thermostat.


Where is the exhaust gas recirculation valve EGR located on a 97 s10 Chevy blazer 43L AC v6?

It should be on the front of the intake manifold directly above and behind the water pump.


What transmission came in the 2002 43L s-10?

4L60/E l


How can you calculate the mass or the volume of 18-k gold?

43L of 18-k gold


Where is the Oxygen Sensor on a 90 Caprice V6 43L?

There is one before and one after the catalytic converter.


Can you swap a 3800 supercharged 38l from a gtp into your 95 Chevrolet cheyenne that's two wheel drive and already has a 43l v6?

What year is the gtp, if 95 or newer yes, if gtp is in the 80's then no due to pollution restrictions today, and may have to change the computers from each vehicle. Each computer is set to specs for the engine it controls.


Where is the EGR on a 1987 43L v6 Chevy Astrovan?

The EGR valve on your Astrovan is on the backside of the intake manifold just under the throttle body attached by two bolts. After installing a new gasket be sure and torque the BOLTS to 17-18ft lbs or the NUTS (if yours has studs) to 15ft lbs)


How do you clean and adjust the throttle body on a 1991 Chevrolet S-10 blazer 43L is it the same as a carburetor?

There is no adjustment required, but you can clean it with a carb cleaner.