Think of an inch with eight parts. Since it is 3/8 of an inch, it's half way between 1/4 and 1/2 of an inch.
There is no direction eqivalent in non-metric cartridges- this was developed as a metric cartridge. The bullet is ABOUT .244 inches in diameter, and the cartridge case a little over 1 inch long. It is similar to, but not the same as the .22 Hornet cartridge.
Marathon bar, from Mars. An eight inch bar with chocolate and caramel
The answer is int(76/6), the integer value of the fraction. This is 12.
8 millimeters is 8 millimeters long. If you'd like it expressed as a different value, please specify. It's less than half an inch.
a inch worm
Eight millimeters is equal to 0.31 inches. There are 24.4 millimeters in one inch and one millimeter is equal to 0.04 inches.
Eight tenths. Just multiply the numerator and denominator by any number, as long you multiply both by the same number
Can be eight or eleven feet long. In actuality, it can be as long as you want. 2x4 refers to the width and height dimensions of the plank, not the length. So I could cut a 2x4 to 2 inches long and it would be a 2 inch long 2x4.
An inch where?
It is a very small fraction. It comes out to 0.137795 inches.
5/16 inch by 1 inch long approx.5/16 inch by 1 inch long approx.