3/5 of 300 = 180
60 divided by 300 multiplied by 100 = 20 Therefore 60 is 20% of 300.
60% of 300 = 180 dollars
180 300 = 10/10 30 = 1/10 30 x 6 = 6/10 = 180
If you mean as a percentage then it is 20%
By the amount and size of grit on the paper. The smaller the number, the less the grit of larger size. the bigger the number, the more the grit of smaller size. 60 grit would be for removing a lot of material, 320 grit would be for finer sanding.
180/300 x 100 = 60 Therefore, 180 is 60 percent of 300.
180% of 300 = 540
You have to start out with a rough grit and work your way down to a fine grade.If it's necessary you start with an 80 grit sandpaper.Then you go over it again with a 120 or 180.If you want it even smoother you go to a 220.You'll need more of the finer grits as they're more easily worn down.
The higher the number code printed on the back of all sandpaper the finer the grit. With a little practice you can begin to understand what grit is appropriate for any given job. For instance, I refinish hardwood floors and it requires three courses of sanding. To help quickly remove an old finish from hardwood floors I start with a very course #20 sandpaper. It is so rough that it removes a large amount of material pretty quickly. Then, when I have sanded the floor down to bare wood I "step up" to 60 grit sandpaper. Once I've gone over the entire floor with the 60 grit I "step up" again to the finer 100 grit paper. When refinishing wood floors or furniture it is necessary to use several courses of sanding to help remove the deep scratches created by the rougher grits of sandpaper. I hope this helps. John
3/5 of 300 = 180
used for polishing or smoothening the nail of succesively finer grit in order to make nails look shiny
60%% rate:= 180/300 * 100%= 0.60 * 100%= 60%
300
60 divided by 300 multiplied by 100 = 20 Therefore 60 is 20% of 300.
Yes, you can polish an SCH stainless steel pipe (40 1 1/2") with a 180 grit.
180