0
Which is the standard used for converting keystroke into corresponding bits?
Wiki User
∙ 11y ago
ASCII
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is the definition of parallel adder?
A parallel adder is a binary adder that can possibly form sum and carry the outputs for addend and augend words that operate on corresponding pairs addend and augend bits in parallel.
Will standard deviation come up on the examination paper?
It can do. Depends on which subject, at which level, in which country. But since you have chosen not to share those relevant bits of information, your question cannot be answered.
How many bits are in a dollar?
eight bits are in a dollar
What is the mantissa of a floating point number?
The mantissa - also known as a significand or coefficient - is the part of a floating-point number which contains the significant digits of that number. In the common IEEE 754 floating point standard, the mantissa is represented by 53 bits of a 64-bit value (double) and 24 bits of a 32-bit value (single).
What decimal numbers can 1 byte represent?
byte has 8 bits all bits at 0 = zero all bits at 1 = 255
When a key is pressed on the keyboard which standard is used for converting the keystroke into the corresponding bits?
ascii
Within a classful addressing subnet mask the bits indicate that corresponding bits in an IPv4 address contain network information?
the 1 bits
How many bits are there in a byte?
Generally speaking, eight bits to a byte. There is no actual standard that defines how many bits are in a byte, but it has become something of a de facto standard.
How many words are there in an address space specified by 24 bits and the corresponding memory space by 16 bits?
address space=24bits => (2 Power 24)=16M words
To match all the bits of any IP address an administrator needs to enter 0.0.0.0 followed by a corresponding wild card mask of?
255.255.255.255
How many network and host bits are in a slash 16 network?
Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.
What is the fastest parallel port standard?
150 KBps 8 bits at a time.
What is a standard term for a data item composed of eight bits?
A unit of data size that consist of 8 bits is a byte (or octet in European countries).
How do you organize drill bit equipment?
When I had a large shop I used to have 3 racks on the wall behind the bench drill press, one for standard drill bits, one for specialist drill bits and one for hole saws, Forstner bits and fly bits.
How many bits are in an IP address that follows the IPv6 standard?
128-bit IP addresses
What is bps for computer?
Abbreviation of bits per second, the standard measure of data transmission speeds.
If quadrature amplitude modulation is used to transmit a signal with a baud rate of 8000 what is the corresponding bit rate?
Baud Rate=8000 Each signal change=4 bits (4 bits yield 16 combinations) Therefore: (4*8000)=32000bps
