A flat piece of glass. Also, any lens where the shape of the convex part matches the shape of the concave part. An example would be a flat piece of glass bent over a sphere.
the objective lens has the power of that lens inscribed on it
Zero to any power is always zero.
It is 1 because everything to the zero power is 1.
The inconsistency is the following:Any number raised to the power zero is equal to one.Zero raised to any power is equal to zero.
Zero
Well you can get zero power lenses. Some people who don't have eyesight problems wear zero power lenses just for fashion. Most of the demo frames at shops have zero power lenses in them.
The lens power increases as the curvature of the lens surface becomes steeper. A lens with a larger radius of curvature will have a lower power, while a lens with a smaller radius of curvature will have a higher power. This relationship is described by the lensmaker's equation, which relates the power of a lens to the refractive index of the lens material and the radii of curvature of its surfaces.
the objective lens has the power of that lens inscribed on it
The Power
See the link below for the formula of lens power.
Zero to any power is zero; any non-zero number to the power zero is one. Thus, zero to the power zero is sort of contradictory.
Zero to the fifth power is zero. Zero divided by zero is indeterminate.
Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.
A lower power lens tells its name in the name. It is a lens in a microscope that has the lowest power, or only magnifies the object you are looking at a little.
The power of a lens is 1/focal length (measured in meters).
Which of the following is a correct procedure for the operation of a microscope? First, put the specimen into focus using a low power lens, then switch to a lower power lens if needed.Remove and add slides while the high power lens is selected.First, put the specimen into focus using a low power lens, then switch to a higher power lens if needed.Use the fine focus knob with the low power lens and use the coarse focus knob with the high power lens
low power objective lens