the objective lens has the power of that lens inscribed on it
Zero to any power is always zero.
It is 1 because everything to the zero power is 1.
The inconsistency is the following:Any number raised to the power zero is equal to one.Zero raised to any power is equal to zero.
Anything to the power of zero is 1
Well you can get zero power lenses. Some people who don't have eyesight problems wear zero power lenses just for fashion. Most of the demo frames at shops have zero power lenses in them.
The lens power increases as the curvature of the lens surface becomes steeper. A lens with a larger radius of curvature will have a lower power, while a lens with a smaller radius of curvature will have a higher power. This relationship is described by the lensmaker's equation, which relates the power of a lens to the refractive index of the lens material and the radii of curvature of its surfaces.
the objective lens has the power of that lens inscribed on it
The total magnification of a microscope is calculated by multiplying the power of the objective lens by the power of the eyepiece lens. Given a total magnification of 200x and an eyepiece lens power of 10x, the power of the objective lens would be 200x/10x = 20x.
Zero to any power is zero; any non-zero number to the power zero is one. Thus, zero to the power zero is sort of contradictory.
Zero to the fifth power is zero. Zero divided by zero is indeterminate.
Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.Any number except zero, raised to the power zero, equals 1. Zero to the power zero is not defined.
The power of a lens is inversely proportional to its thickness. Thicker lenses have a higher power, while thinner lenses have a lower power. This relationship is determined by the curvature of the lens surfaces and the material it is made of.
A lower power lens tells its name in the name. It is a lens in a microscope that has the lowest power, or only magnifies the object you are looking at a little.
The power of a lens is 1/focal length (measured in meters).
Which of the following is a correct procedure for the operation of a microscope? First, put the specimen into focus using a low power lens, then switch to a lower power lens if needed.Remove and add slides while the high power lens is selected.First, put the specimen into focus using a low power lens, then switch to a higher power lens if needed.Use the fine focus knob with the low power lens and use the coarse focus knob with the high power lens
low power objective lens