0
Which routing protocol maintains a topology table separate from the routing table?
Wiki User
∙ 12y ago
EIGRP
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is dynamically as related to a routing protocol?
Dynamically, as related to a routing protocol is a type of networking technique whereby the routing protocol creates, updates and maintains the dynamic routing table.
What protocols should be used fro a star-bus topology?
1.) Mesh topology:- Routing protocol such as RIP(routing information protocol) or OSPF (open shortest path protocol) is used. 2.) Star topology:- Ethernet, token ring, Local Talk, ATM........... all are used... 3.)Bus topology:- Ethernet protocol using CS-MA/CD as access method.....
What routing protocol depends on the dual algorithm to calculate the shortest path?
Enhanced Interior Gateway Protocol It is a Cisco proprietary protocol. It uses bandwidth and delay by default to calculate the best path. It can also use load and delay, but these are usually not used. It is a distance vector routing protocol. It keeps a topology map, but it is only similar to the topology map of link state routing protocols.
Can you explain to you the OSPF?
Open Shortest Path First (OSPF) is a type of routing protocol known as an interior gateway protocol or an interior routing protocol. The routers in an internet are responsible for receiving and forwarding packets through the interconnected set of networks. Each router makes routing decisions based on knowledge of the topology and traffic/delay conditions of the internet. The routing protocol between routers is used to exchange topology and traffic delay information. An interior routing protocol is used within a portion of the internet called an autonomous system, which simply means a connected set of routers that are managed by a single organization. OSPF is the most commonly used interior routing protocol.
What are two advantages of using a link-state routing protocol instead of a distance vector routing protocol?
Each router independently determines the route to each network. After the inital LSP flooding, they generally require less bandwidth to communicate changes in a topology.
What protocol is RIP?
RIP stands for routing information protocol. It is an intra domain routing protocol.
What are three benefits of IPv6?
this protocol routes data packets between networks . IP address specify the locations of the source and destination nodes in the topology of routing system.
What is the difference between Link state routing and distance vector routing through examples?
In a distance vector routing protocol, such as RIP or EIGRP, each router sends its routing table to neighboring routers. The routers don't know the topology, i.e., how other routers are interconnected. In a link state routing protocol, such as OSPF or IS-IS, routers first exchange information about connections within the network (or an area of the network), and build a topology table. Then each router uses Dijkstra's algorithm to calculate the best route to each destination.
What is RIP routing protocol?
RIP is a routing protocol - a protocol (set of rules) that allows a router to exchange information, with other routers, about existing routes.
What three routing protocols are distance vector routing protocols?
Routing Information Protocol (RIP) and Interior Gateway Routing Protocol (IGRP) are two very popular Distance Vector routing protocols
What is the characteristic of a classless routing protocol?
A classless routing protocol can route between subnets
What is the method that a routing protocol uses to determine the best route to a destination network?
It depends on the routing protocol in use, for example RIP uses the hop-count to determine the best route where less hops is better, OSPF uses cost, EIGRP uses a composite metric (BW + Delay + Reliability + Load) etc.
