answersLogoWhite

0


Best Answer

step ladder

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Which type of ladder is a non self supporting has one section and has a fixed length which is determined by the length of the side of the rails?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

In order to reach a roof that's located 24 feet above the ground the ladder used must extend to a height of at least?

Assuming it is a two section ladder then it must therefore have a minimum length of 28 feet.


The base of a ladder is 7 feet away from the wall The top of the ladder is 19 feet from the floor Find the length of the ladder to the nearest thousandth?

Using Pythagoras' theorem the length of the ladder is 20.248 feet


What ladder type offers the greatest length in general purpose ladders?

Extension Ladder


A ladder is leaning against a building so that the distance from the ground to the top of the ladder is one foot less than the length of the ladder. Find the length of the ladder if the distance from the bottom of the ladder to the building is 5 feet?

A. 11 feet B. 13 C. 12 D. 14.


Are step ladder heights measured to top rung or the platform?

The length of a step ladder is its height. An eight foot step ladder is 8' long.


A ladder is resting against a wall The top of the ladder touches the wall at a height of 6 feet Find the length of the ladder if the length is 2 feet more than its distance from the wall?

10 feet, and it is at a very dangerous angle.


A log is 2500 cm in lengthhow many meters is itthe diameter cross section measures 250 cm?

The diameter of a log cannot be determined from its length.


A ladder is resting against a wall the top of the ladder touches the wall at a height of 18 feet find the length of the ladder if the length is 6 feet more than its distance from th wall?

24


A ladder of length 5m rests against a wall The foot of the ladder is 1.7m from the base of the wall How far up the wall does the ladder reach?

6.7


What is 4 to 1 ratio for ladder use?

That probably refers to the ratio between the length of the ladder, and the distance at which you place the bottom part of the ladder from the wall. If this distance is too short, you have the risk of the ladder falling backwards.


What is the formula for the length of a square?

The length of a square is not determined by a formula, it is determined by measuring the square.


How do you find the length of a prism with the cross-section and volume?

length = volume/cross-section