CFL tubes work on the principal of fluorescent effects produced by electrons. Electrons emitted from the cathode in CFL tubes are incident on the chemicals pasted on inner walls of the CFL tube and visible light is produced there as a result of fluorescence. Now, since the electron beams travel only in straight lines, the CFL tube has to be linearly straight for optimum incidence of electrons on the walls of CFL device.
As the number of bulbs in a series circuit increases, the current decreases. As the number of bulbs in a parallel circuit increases, the current increases.
Two bulbs in parallel are brighter than the same two bulbs in series, given the same potential voltage, because there is twice the available voltage to each bulb.
They Are Dim Because the d-cell being used does not produce enough energy to light them both
That depends on the bulb, and the time frame. The first bulbs had carbon filaments. Certain bulbs used in control devices have iridium filaments. Modern grocery store incandescent bulbs have tungsten filaments.Tungsten, because of its very high melting point.
Generally Exit lights have very little ventilation and the bulbs are continuously heated and burn out faster. Some have vent holes but they want you to replace the bulbs which are costly after a while.
By using less electrical energy. Turn off things that are not being used. Change to electrical devices that use less electricity (LED bulbs instead of incandescent bulbs, etc.)
It depends on the design of the bulb. Typical incandescent bulbs last between 750 and 1000 hours of operation.
Light in fluorescent bulbs occurs when electricity excites the mercury vapor inside the tubular glass bulb.
cuzz its better yoo.
The typical wattage of a tanning bed bulb is 100W, but you need to check the size of the bed to make sure.
higher melting temperature
Florescent lams do ... museums use a tubular UV filter over those bulbs to prevent damage to two-dimensional paper ephemera.
Instead of using light bulbs, they used candles.
Xenon bulbs are much brighter than regular light bulbs. They are more expensive that normal light bulbs. this is partly because of the cost of xenon gas, but also because of the heat generated by the bulb that requires them to be housed in quartz instead of glass.
To produce light using electricity instead of using fire.
Compact fluorescent light bulbs.
It most certainly does. For one, there is the matter of aesthetics. Different shapes are used for different decorative applications. Round ("G" for globular) are often used in light fixtures in baths and dressing rooms as opposed to the most common "PS" or "pear shaped" light bulbs. Some light fixtures and portable lamps will only accept "T" (tubular) light bulbs such as picture and piano lamps. Certain shapes are determined by the electrical characteristics of the light bulb. Fluorescent light bulbs are tubular as a result although the tube may be wrapped or formed into different overall shapes, it is still a tube. Compact fluorescent light bulbs are simply fluorescent tubes that have been folded or wrapped into a compact shape. Light bulbs using reflectors have to be of a certain shape in order to properly reflect light in a certain direction and pattern.