Mechanical advantage is not the only reason to use levers.
Levers are used to multiply the mechanical force applied to a load.
The adverb relating to advantage is "advantageously" - pronounced with a stress on the third syllable.
One third didn't finish.
hfgvgbvkn
Third time's the charm.
There are three types of levers namely first, second and third class. First class levers can change the direction of input force.
Yes scissors are third class levers
1st order levers have the fulcrum between the load and effort arms. The mechanical advantage of these levers can be greater or less than 1, depending on the length of the arms.2nd order levers have the load portion between the effort portion and the fulcrum. These always have a mechanical advantage greater than 1. They increase the force exerted at the expense of distance.3rd order levers have the effort portion between the load portion and the fulcrum. These always have a mechanical advantage less than 1. They decrease the force exerted with a gain to the distance.
mechanical advantage is the output force divided by the input force
Levers are used to multiply the mechanical force applied to a load.
this is a third class lever
(AMA / IMA)100 Where AMA represents the actual mechanical advantage and IMA represents the Ideal Mechanical advantage. AMA = Fr/Fe where Fr equals the force of the resistance from the fulcrum, and Fe equals the force of the effort. IMA = De/Dr where De equals the Distance of the effort from the fulcrum and Dr equals the distance of the resistance from the fulcrum
the arm and your wrist are two good examples of third class levers in your body
Third class levers multiply speed but provide no mechanical advantage, usually more force is exerted because the effort is between the load and the fulcrum as in a baseball bat, tongs or a nut cracker. The speed is multiplied because the distance is multiplied.
first class lever
Yes
It is a third class lever.