Want this question answered?
72 units
Like 3D. Looks like you can hold it. It's not flat
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
Most companies use weight to measure how much a diaper can hold. Weigh it before and after then subtract the weight before from the weight after.
Think of surface area as your skin and volume as all the contents inside your body. So they relate because surface area can hold volume or volume could be inside the surface area.
Press and hold the menu button on a flat surface
The sucker is dish shaped, when pressed against a smooth surface the air is forced from beneath the sucker.The rubber makes an air tight seal and the air pressure outside is greater than the air pressure beneath the sucker, thus forcing the rubber sucker to 'stick'.
This mount can hold up to 125 pounds, and accommodates most 52" flat panel TVs.
Any flat t.v stand or any stand with a flat surface where the console will not slide off would be a good pick.
To give a larger surface area, increasing the strength of the hold
72 units
water does not lie entirely flat, the surface is convexed, causing a similar effect as a magnifying glass.
a runner is what goes along the ground and a sucker is what sticks to the runner to hold it down and the plant runs a long the ground.
The Home Styles Furniture Chesapeake Flat Panel/Plasma/LCD Entertainment Center will hold up to 300 pounds.
A pallet is a flat surface on which you pile stuff. Usually there is a weight limit on how much you can pile on top of it before it breaks, rather than a volume limit. It would depend on how heavy the stuff is and how well it is piled and held together (how stable the load is) and how well the weight is distributed across the pallet.
A square foot of Plexiglas can hold no water. It is a flat sheet. A cube of Plexiglas would be needed.
Pure water can roughly hold 0.073 grams per cm at 20 degree Celsius.Impurities can change the figures.