Yes. You can measure liquid volume in milliliters. A graduated cylinder is used to measure liquid volume in millimeters, mL.
False. Kilograms measure mass. Liters measure volume.
In Civil engineering, Loose Measure Volume is the measure of the volume of a material after it has been dug up. In general, it will have a lower density than Bank Measure.
Volume.
This is volume of the Universe ! As an unit of measure the cubic metre and multiples.
The ratio of clearance volume and the volume of the compressor
clearance volume decreases the volumetric effienfy of compressor.the clearance volume should not be too less or too more.
Compression Ratio is the ratio between the original volume and the compressed volume in combustion chamber. The compression ratio is denoted as CR. It is the measure of how much air-fuel mixture is compressed during the compression stroke in the case of the gasoline engine (in the case of the diesel engine only air is compressed. Compression ratio is found by dividing the volume of stroke of the cylinder (swept volume) and clearance volume when the piston is at BDC by the volume when the piston is at TDC (ie clearance volume). Compression ratio= (Swept volume + Clearance volume) / Clearance volume. For example engine has a Swept volume of 700 cc. It has clearance volume 50 cc. Compression ratio= (700 + 80) / 80 =9.75: 1 It means Air fuel mixture is compressed to 1/9.75 of its original volume during compression stroke.
Sure, gallon is a measure of volume; you can measure or calculate the volume of a person.Sure, gallon is a measure of volume; you can measure or calculate the volume of a person.Sure, gallon is a measure of volume; you can measure or calculate the volume of a person.Sure, gallon is a measure of volume; you can measure or calculate the volume of a person.
Clearance volume usually refers to the volume above the piston(to the top of the block) if the piston is receased( .30'' in the hole). + vavle relief in cc's+ the volume of the head gasket.
bradleys disabled mom
To measure volume
It is a measure of volume.It is a measure of volume.It is a measure of volume.It is a measure of volume.
This is the ratio between the total volume to the clearance volume in IC engines
No, millimeter is a measure of length, not volume.
A litre is a measure of a liquids volume
Litres is used to measure volume.