Want this question answered?
A meter (or metre) is slightly longer. A yard is about 90 centimeters.A meter (or metre) is slightly longer. A yard is about 90 centimeters.A meter (or metre) is slightly longer. A yard is about 90 centimeters.A meter (or metre) is slightly longer. A yard is about 90 centimeters.
No, a meter is longer.
A meter is a bit longer than three feet.
One meter is longer.
1 meter = 10 decimetersso 1 meter is longer than 9 decimeters
why lenght of divergent cone is larger than convergent cone in venturi meter
In case of venturi meter, at the diverging section mach number is less than 1. however in diverging section of a nozzle mach number is greater than 1.
In Venturi meter losses are less so coefficient of discharge is higher whereas in orifice meter due to no convergent and divergent cones there are more losses and hence its coefficient of discharge is less.In venturi meter losses are low due to steamline shape of the diffuser and the pressure gradient is not abrupt as in case of orifice meter.
Venturi Meter is a device used for measuring the flow of the fluid.
9
The discharge coefficient is near unity and Non-recoverable net head loss is very small.
The orifice plate can easily be changed to accomodate widely different flow rates, whereas the throat diameter of a venturi is fixed, so that its range of flow rates is circumscribed by the practical limits of Dp.The orifice meter has a large permanent loss of pressure because of the presence of eddies on the downstream side of the orifice-plate; the shape of the venturi meter prevents the formation OS these eddies and greatly reduces the permanent loss.The orifice is cheap and easy to install. The venturi meter is expensive, as it must be carefully proportioned and fabricated. A home made orifice is often entirely satisfactory, whereas a venturi meter is practically always purchased from an instrument dealer.On the other hand, the head lost in the orifice for the same conditions as in the venturi is many times greater. The power lost is proportionally greater, and, when an orifice is inserted in a line carrying fluid continuously over long periods of time, the cost of the power may be out of all proportion to the saving in first cost. Orifices are therefore best used for testing purposes or other cases where the power lost is not a factor, as in steam lines.However, in spite of considerations of power loss, orifices are widely used, partly because of their greater flexibility, because installing a new orifice plate with a different opening is a simpler matter. The venturi meter can not be so altered. Venturi meters are used only for permanent installations.It should be noted that for a given pipe diameter and a given diameter of orifice opening or venturi throat, the reading of the venturi meter for a given velocity is to the reading of the orifice as (0.61/0.98)2, or 1:2.58.(i.e. orifice meter will show higher manometer reading for a given velocity than venturi meter).
a meter is longer than a foot
Measuring flow of a fluid based on Bernoulli's principle.
A 'meter' contains:10 decimeters100 centimeters1000 millimetersHence, a meter is longer than a millimeter.
No, a kilometer is longer than a meter.
A meter is longer; it equals about 39.37 inches.