there could be manyreasons for this problem. the most likely of these are blown head gasket, worn or damaged piston and rings and or cyl.
about 25-30 psi....
Approximately 125 psi, all within 25%.Approximately 125 psi, all within 25%.
100 psi and all within 25%100 psi and all within 25%
25 psi x2 35 psi loaded
25-30 psi
100 psi to 140 psi.
10.85 psi.
All should be around 125 psi plus or minus 25%All should be around 125 psi plus or minus 25%
Front Tyre:25 psi Rear Tyre:35 psi
Front-25 PSI Rear -29 PSI(In case of Tuff-up Tube) / other wise 33 PSI
To convert PN25 to PSI, you can use the conversion factor where 1 PN (Pressure Nominal) is equivalent to approximately 145 PSI. Therefore, to convert PN25 to PSI, multiply 25 by 145. This results in approximately 3625 PSI.
25 - 30 psi