0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What does34mm socket convert to in inches?
1.339 in Algebraic Steps / Dimensional Analysis Formula 34 mm*1 cm 10 mm*1 in 2.54 cm=1.338582677 in Direct Conversion Formula 34 mm*1 in 25.4 mm=1.338582677 in
How much is 9mm in inches?
25.4 mm =1 in → 9 mm = 9 ÷ 25.4 in = 45/127 in ≈ 0.354 in ------------- If you're converting between metric and imperial socket sets: 9 mm is slightly bigger than 11/32 in: 11/32 in ≈ 8.75 mm 3/8 in ≈ 9.5 mm
What are the Verbs in this sentence. Calipers were set and verified at 5 mm?
were set verified - are the verbs.This is a passive sentence were set and (were) verified are the passive verb phrases.
What artists did the song mm- mm- mm- mm- mm- mm in the 1960's?
The song "Mm Mm Mm Mm Mm Mm" was released in 1964 by Wayne Fontana and the Mindbenders.
How much is a 1981 US proof set that has all 6 coins with S mm worth?
Average current value for an 1981 proof set is about $8.00. The 1982 proof set is the year that is known for the dime to be missing the mintmark.
Show you a 15 mm hex socket wrench?
A 15 mm socket is one of the most common used on modern cars. If you don't have one,go and buy a decent socket set.
What is the wrench size to take off the front brake pads of a 2000 Saturn LS?
to remove the front brakes you need a 7mm hex socket and a 10 mm hex socket
Where is the oil filter located on a 2003 BMW Z4?
Top front of the engine, located in a canister that has a big (38 mm or 36 mm) hex molded into the top. Using a socket on this hex head, the top screws off.
What size tool to remove caliper on Saturn L 200?
7mm hex socket for the front caliper and 10 mm hex for the bracket bolts. For the rear if you have disc it's 19mm for the caliper
What socket set do you need to replace a bumper on a 1999 ford escort sport?
You'll need a 3/8 inch socket set. 10 mm and 14 mm sockets. 9 inch extension.
How do you change a rear signal bulb on Mercury Mountaineer?
You first need to open the rear lift gate. Then you need to remove the two hex-head bolts from the side of the tail lamp using a socket wrench and 7 mm socket.
What does 25 mm socket transfer to in inches?
25mm socket equals i(one) inchAnswer25mm socket equals i(one) inch Direct Conversion Formula25 mm*1 in25.4 mm=0.9842519685 in
What is the caliper bolt size for a 1995 Kia Sephia?
I have a 1996 Kia Sephia. The calipers are the same stock # on the 1995 model. You need a Hex Bit Socket. Size : 7 MM Hope that helps. TC
What is OD of 30 mm socket?
Depends on if it is a standard or thin wall socket. Measure it.
What is the oil filter socket size in a 2004 Chevy cavalier?
32 mm socket!
What tool do you need to remove the calipers from a 2007 Chevy Malibu ls?
15 mm socket and ratchet for the caliper to bracket. if not it is a 13 mm socket and ratchet. the bracket to spindle is 18mm socket and ratchet
What size socket for oil plug Mitsubishi magna es 2005?
24 mm socket
